Accessory Drive Belt Noise – 2007-2008 Toyota

T-SB-0081-09
March 4, 2009

 

3UR-FE Accessory Drive Belt Noise

Service Category	Engine/Hybrid System
Section	Engine Mechanical	Market	USA

 

Applicability

YEAR(S)	MODEL(S)	ADDITIONAL INFORMATION
2008	Sequoia
2007 – 2008	Tundra

 

Introduction

Some customers may experience an abnormal noise from the engine accessory drive belt area during an initial start. An improved accessory drive belt has been developed to reduce this noise. Use the procedure in this bulletin to address customer concerns.

 

Parts Information

PREVIOUS PART NUMBER	CURRENT PART NUMBER	PART NAME	QTY
90916-A2014	90916-02680	Belt, V-Ribbed	1

 

Warranty Information

OP CODE	DESCRIPTION	TIME	OFP	T1	T2
160251	R & R Accessory Drive Belt	0.5	90916-A2014	91	14

 

APPLICABLE WARRANTY This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date. Warranty application is limited to correction of a problem based upon a customer’s specific complaint.

 

Repair Procedure

1. Remove the drive belt.

Refer to the Technical Information System (TIS), applicable model and model year Repair Manual:

• 2008 Sequoia, Engine/Hybrid System – Engine Mechanical – “3UR-FE Engine Mechanical: Drive Belt: Removal”
• 2007 / 2008 Tundra, Engine/Hybrid System – Engine Mechanical – “3UR-FE Engine Mechanical: Drive Belt: Removal”

2. Replace the drive belt.

Refer to TIS:

• 2008 Sequoia, Engine/Hybrid System – Engine Mechanical – “3UR-FE Engine Mechanical: Drive Belt: Installation”

• 2007 / 2008 Tundra, Engine/Hybrid System – Engine Mechanical – “3UR-FE Engine Mechanical: Drive Belt: Installation”

3. Confirm the condition has been corrected.