HVAC Control Panel Illumination Dim – 2003-2009 Toyota 4Runner

“This site contains affiliate links for which OEMDTC may be compensated”

T-SB-0113-10
April 23, 2010

 

HVAC Control Panel Illumination Dim

 

Service Category Vehicle Interior
Section Heating/Air Conditioning Market USA

 

Applicability

YEAR(S) MODEL(S) ADDITIONAL INFORMATION
2003 – 2009 4Runner

 

Introduction

Some 4Runner vehicles may exhibit a condition where the HVAC control panel illumination is dim, flickering, or intermittently inoperative. A newly designed light bulb has been made available to resolve this concern.

 

Production Change Information

This TSB applies to vehicles produced BEFORE the Production Change Effective VINs shown below.

MODEL DRIVETRAIN ENGINE PRODUCTION CHANGE EFFECTIVE VIN
4Runner 2WD 1GR-FE JTEZU14R*9K024732
JTEZU17R*9K024733
2UZ-FE JTEZT17R*9K001651
JTEZT14R*9K001653
4WD 1GR-FE JTEBU17R*9K038302
JTEBU14R*9K038305
2UZ-FE JTEBT17R*9K006867
JTEBT14R*9K006870

 

Warranty Information

OP CODE DESCRIPTION TIME OFP T1 T2
AC9011 R & R HVAC Control Panel Illumination Bulbs 0.3 90010-09017 72 41

 

APPLICABLE WARRANTY

  • This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from the vehicle’s in-service date.
  • Warranty application is limited to occurrence of the specified condition described in this bulletin.

 

Parts Information

PREVIOUS PART NUMBER CURRENT PART NUMBER PART NAME QTY
90010-09017 Same Bulb, Cooler Control Switch 2

 

Required Tools & Equipment

SPECIAL SERVICE TOOLS (SST’S) PART NUMBER QTY
Plastic Pry Tool Set* 00002-06000-01 1

 

* Essential SST.

NOTE

Additional SSTs may be ordered by calling 1-800-933-8335.

 

Repair Procedure

  1. Confirm that the customer’s concern is of a dim, flickering, or intermittently inoperative HVAC illumination panel in the area shown in Figure 1.

Figure 1.

HVAC illumination panel

 

  1. Remove the air conditioning control assembly.

Refer to the Technical Information System (TIS), applicable model year 4Runner Repair Manual:

  1. Replace the 2 light bulbs for the HVAC control panel illumination circuit. (Refer to Figure 2.)

Using a small flat blade screwdriver, turn the light bulbs counter clockwise to remove and clockwise to install/tighten.

  1. Install the air conditioning control assembly.

Refer to TIS, applicable model year 4Runner Repair Manual:

  1. Confirm the HVAC Control Panel Illumination and Controls are operating correctly.

 

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.40 MB]

 

 

Leave a Comment

Share to...