EL004-02
April 26, 2002
Title:
DOME LAMP FLICKERS OR STAYS ON
Models:
’01 – ’02 Sequoia
Introduction
On some 2001 – 2002 model year Sequoia vehicles, the Rear Interior Light (Dome Light) may flicker or will not turn off. This usually occurs when the Dome Light switch is set in the “Door” position. The Dome Lamp Assembly has been improved to correct this condition.
Applicable Vehicles
- 2001 – 2002 model year Sequoia vehicles produced before the VIN shown below.
Production Change Information
| MODEL | STARTING VIN |
|---|---|
| Sequoia | 5TD#T##A92S090584 |
Parts Information
| PREVIOUS PART NUMBER | CURRENT PART NUMBER | PART NAME | |
|---|---|---|---|
| 81240–0C030–## | Same | Lamp Assembly, Dome | |
Repair Procedure
Replace the Dome Lamp Assembly with a countermeasure part.
Warranty Information
| OP CODE | DESCRIPTION | TIME | OPN | T1 | T2 |
|---|---|---|---|---|---|
| EL1019 | R & R Dome Lamp Assembly | 0.5 | 81240–0C030–## | 82 | 51 |
| Applicable Warranty*:
This repair is covered under the Toyota |
* Warranty application is limited to correction of a problem based upon a customer’s specific complaint.
- Pack of 10 bulbs, Non Canbus LED bulb, Fit bulb size: 194, 168, 174, 175, 2825 etc, multiple usage automotive interior light bulb. Can fit applications like map light, dome light, door light, license plate light, trunk light depending on the model of the car.
- Non Polarity specific which mean you can plug the bulb in either way and it will still work
- Each bulb built with three 3030 high power SMD. Give your car pure white super bright light output.
- Direct replace the original halogen bulb. Plug and play for easy installation.
- each bulb output 200 lumen super bright white color.
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
- Direct replacement for all T10 Wedge Type W5W, 147, 152, 158, 159, 161, 168, 184, 192, 193, 194 2825. Car Interior Dome Map Door Courtesy License Plate Light
- Input : DC12V, No UV or IR radiation - LED : High Quality Chip SMD5050 x 5P. - Color : White 6000K.
- If they don't light properly after inserting into the socket, please insert oppositely or flip the bulb horizontally to match the + and - polarity.
- Please try to pull the pins on the base outwards a little in case the bulb is slightly loose or no good contact in the socket.
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2026-06-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.



