| “This site contains affiliate links for which OEMDTC may be compensated” |
TECHNICAL INSTRUCTIONS
FOR
SAFETY RECALL 21TA03
VEHICLE MAY STALL IF LOW-PRESSURE FUEL PUMP BECOMES INOPERATIVE
CERTAIN 2018 – 2019 MODEL YEAR 86
BACKGROUND
The subject vehicles were manufactured by Subaru. According to Subaru, the subject vehicles are equipped with a low-pressure fuel pump which may stop operating. If this were to occur, warning lights and messages may illuminate on the instrument panel, and the engine may run rough. This may result in a vehicle stall and the vehicle may unable to be restarted. This can increase the risk of a crash.
Vehicle May Stall if Low-Pressure Fuel Pump Becomes Inoperative – 2018-2019 Toyota 86
Vehicle May Stall if Low-Pressure Fuel Pump Becomes Inoperative – 2018-2019 Toyota 86
Remedy Instructions and TSB
RCRIT-21V587-9068.pdf 2630.572KB
Loading...
Reload document 
Open in new tab
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V587&docType=RCL
- Universal Design: The included adapters, hoses and fittings cover all fuel injection systems and most Gas Engine Cars, Motorcycles, Trucks, SUVs, ATVs, UTVs, RVs. ( Does not compatible with Bosch, CIS Jetronic, TB System on GM vehicles. )
- Ideal For Mechanics: Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste.
- Durable: Designed for repeated use with high quality materials.
- Convenient and Safe Design: Fuel pressure tester with a quick release valve button could offer single-handed operation inflation and deflation.
- Measuring Range: 0-140psi (0-10 bar)
- 【Universal Design】：Fuel pressure Tester kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
- 【Ideal For Mechanics】：measuring range：0-140psi / 0-10bar,Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste，Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines.
- 【Multipurpose Use】：The 15" hose connects snugly to any 1/4" standard Schrader valve; the 8" hose fits all M6 fuel pressure test ports; and the M8, M10, M12, and M14 adapters make sure this tool kit can be used on a variety of cars, trucks, motorcycles, and more.
- 【Convenient And Safe Design】：Fuel pressure tester with a quick release valve button could offer single-handed operation inflation and deflation.
- 【Satisfied Customer Service】：This fuel injection pump pressure test kit helps to find most auto fuel system issues, it is a must have kit for DIYer or professional mechanic.Any quality related problem in 1 year, we will replace the fittings for free or refund.
- Dual Dial For Accurate Reading, With A 140 PSI /10 Bar Scale
- Deluxe Manometer Fuel Injection Pressure Tester Gauge Kit
- Set comes in a specially designed molded case to make storage easy and organized.
- A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters.
- The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!
- Premium Quality: The fuel pressure tester gauge uses metal gauge head with shockproof rubber cover, the 2 hoses are made of rubber nylon resin. The connectors are made of brass and aluminium, featured with high hardness, rustless, durable and good air sealing.
- Specifications: 3-1/2" big dial with clear dual scale range 0-140 PSI and 0-10 Bar. The length of the 2 hoses are 15" and 8", the working pressure is 300 PSI.
- Function: The fuel pressure tester gauge readings assist to diagnose if there are the following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston.
- Wide Application: This oil pressure tester gauge suitable for compression pressure testing of petrol, gas, and fuel engine cylinders for most spark plug types on cars, trucks, motorcycles, marines, ATVs, UTVs, snowmobiles, boats, etc, not for diesel high pressure injection pump or direct-injection engine.
- Package Included: 1x 3-1/2" big dial pressure gauge, 1x 15"L long hose with 1/4" Female brass parts, 1x 8"L short hose with 1/4" Male x M6 brass parts, 1x T type parts, 13x Brass parts, 1x Hose (1/4" x 3-1/2"L), 1x Hose (3/8" x 3-1/2"L), 2x Hose clamps
- PARAMETER---Double Scale Gauge:0-7bar,0-100psi.Three size adapters :6.30mm(SAE 1/4)7.89mm(SAE 5/16)9.49mm(SAE 3/8).
- UNIVERSAL DESIGN ---Used on any engine you need to read fuel psi on.Helps identify and diagnose low fuel pressure, a faulty fuel pressure regulator, leaking injectors, fuel leaks, and clogged fuel filters.
- WELL MADE---High quality brass connectors and Corrosion resistant rubber hose.Will last a long time.
- NOTE---Never use this Fuel Pressure Tester Kit on Diesel engines!
- 3.5" Versatile fuel pressure gauge kit features a special expanded 1lb. increment dual dial for accurate reading, with a scale of 0-140 PSI /0-10 bar scale.
- Designed with a relief valve and 6 feet of tubing to relieve the pressure and fuel safely.
- Gauge designed with shockproof cover and hook for convenient use
- Kit comes with adapters, hoses and fittings, suitable for most cars and trucks and fuel injection systems.
- The fuel pressure gauge kit equipped with pressure release valve makes it safe and fast to use, also allows checking for sufficient fuel flow.
- Universal Tool Set: This fuel pressure tester diagnoses variability problems caused by poor fuel pressure. The fuel pressure tester kit includes hoses, fittings and different sizes of adapters fitting most vehicles. The gas oil pressure tools for cars and trucks can perfectly help you fix all the fuel pressure issue.
- Pressure Tester Gauge: The dual scale range of gasoline tester tool set is 0-140psi (0-10 bar). The fuel pressure tester can determine if the fuel pump is malfunctioning or experiencing inconsistent pressure flow fast and reliably. The fuel pressure gauge is designed to be compatible with various motors and cars, allowing you to obtain precise readings for valves, piston rings, cylinder bores, and head gaskets.
- Premium Quality: The gauge fuel pressure gauge kit is constructed from strong & anti-corrosion materials to ensure long lasting using life. The black rubber nylon hose increase stress resistance for repeated use.
- Wide Use: The gasoline pressure meter is equipped with all necessary fittings to attach to vehicle pressurized system. So the auto fuel injection pump pressure set can be used on most common cars, trucks, SUV, Motorcycle, ATV, RV (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded). Note: the fuel oil injector tester tool kit is not applicable for diesel high pressure injection pump or direct-injection engine.
- Easy Storage: The auto fuel pressure gauge tester kit comes in a blow molded case for safe & easy transport and storage. All products are 100% brand new. If you think the item you received is used, please contact us for a replacement.
- OTC's Fuel Pressure Test Kit quickly and easily locates any malfunctioning fuel system component - fuel filters, pressure regulators, fuel lines, and fuel pumps - without removing it from the vehicle
- Large, easy to read gauge features an impact resistant rubber encased housing
- 0-100 psi, 0-700 kPa
- High quality solid brass fittings, hose, and tubing for long lasting performance and reliability
- Convenient pressure relief valve allows for safe, clean testing
- FUEL INJECTION PRESSURE TESTER KIT: Fuel injection pressure kit is made of high quality materials which have good durability and reliability.
- EASY INSTALLATION:Fuel injection pressure kits are well-designed for simple and easy installation. Equipped with the required connectors and installation guide, it enables users to complete the installation quickly and accurately, saving time.
- Precision Parameters. Fuel Pressure Gauge Kit has a dual dial for accurate readings in the range of 140 PSI / 10 Bar
- VERSATILE USE:This fuel injection pressure tester kit is commonly used for a wide range of vehicles and engine types, including automobiles, motorcycles, and boats. It is compatible with a wide range of fuel injection systems, providing superior fuel injection solutions for different types of vehicles.
- 100% Satisfaction: We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern.
- Wide Compatibility: Fits gasoline engines in cars, trucks, motorcycles, ATVs, and RVs.
- Accurate Testing: Measures 0-140PSI to diagnose fuel supply and injection issues.
- Versatile Adapters: Includes multiple hoses and adapters for broad vehicle coverage.
- User-Friendly: Quick release valve for easy, single-handed operation.
- Reliable Service: One-year warranty with free replacements or refunds.
Last update on 2024-07-02 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
1 TECHNICAL INSTRUCTIONS FOR SAFETY RECALL 21TA03 VEHICLE MAY STALL IF LOW-PRESSURE FUEL PUMP BECOMES INOPERATIVE CERTAIN 2018 – 2019 MODEL YEAR 86 The repair quality of covered vehicles is extremely important to Toyota. All dealership technicians performing this recall are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this repair are required to currently have completed all of the following courses: -T623 Electrical Circuit Diagnosis It is the dealership’s responsibility to select technicians that have completed the above courses to perform this repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to perform this repair at all times. 2 I. OPERATION FLOW CHART Verify Vehicle Eligibility1. Confirm vehicle VIN matches RO.2. Check Vehicle Inquiry for Campaign eligibility. No further action required. Not Covered Covered Campaign complete. Return the vehicle to the customer. Install the NEW fuel pump assembly. Reassemble Fuel Suction Tube Assembly Reinstall Fuel Suction Tube Assembly into vehicle Remove fuel suction tube assembly from vehicle. Disassemble fuel suction tube assembly. 3 II. IDENTIFICATION OF AFFECTED VEHICLES • CHECK VEHICLE FOR CAMPAIGN ELIGIBILITY a. Compare the vehicles VIN to the VIN listed on the Repair Order to ensure they match. b. Check the TIS Vehicle Inquiry System to confirm the VIN is involved in this campaign, and that it has not already been completed prior to dealer shipment or by another dealer. Note: • TMS warranty will not reimburse dealers for repairs completed on vehicles that are not affected or were completed by another dealer. III. PREPARATION A. PARTS Part Number Part Description Quantity SU003-10808 PUMP 86* 1 *The kit above includes the following parts: No. Part Number PART DESCRIPTION Quantity 1 SU003-04154 FUEL PUMP ASSEMBLY 1 2 SU003-04515 O-RING (Thick) 1 3 SU003-04516 E-RING 1 4 SU003-04159 O-RING (Thin) 1 5 SU003-07284 GASKET 1 6 SU003-01023 FUEL PUMP GAUGE RETAINER 1 7 SU003-04167 SEAT RING 1 8 – TEMPORARY PLUG 1 9 – SPECIAL TOOL PE/S 1 B. TOOLS & EQUIPMENT • Techstream • Standard Hand Tools • Torque Wrench • Air Blow Gun • Vernier Calipers 150mm • Gas Caddy (Minimum 25 gallon capacity) 4 C. MATERIALS • Brake Cleaner • Butyl Tape • Engine Oil • Protective Gloves • Protective Glasses • Protective Tape • Plastic Bag • Tray • Cloth • Marker Pen D. SPECIAL SERVICE TOOLS “Claw Set for ZN6” will be used with the dealerships existing Handle set from the Fuel Sender Lock Nut Wrench Set (09808-14031). This set of tools will supplement the SST kit that each dealership currently has. Additional SST’s can be purchased through the Toyota Special Service Tools (SST) website SST – These Special Service Tools required for this repair: Part Number Tool Name ILLUSTRATION Quantity 09808-14031 Fuel Sender Lock Nut Wrench Kit 1 *The set above includes the following tools: Part Number Part Description Quantity 09808-01080-01 Sliding Jaw 1 09808-01070-01 105mm Jaw Set 1 09808-01060-01 18mm Jaw Set 1 09808-01040-01 50mm Jaw Set 1 09808-01030-01 Crossbar 1 09808-01010-01 Handle 1 E. CAMPAIGN TOOLS Part Number Part Description Illustration Quantity Remarks 09808-99140 Claw Set for ZN6 1 Equivalent tool to claw No.3 (09808-01070) IV. BACKGROUND The subject vehicles were manufactured by Subaru. According to Subaru, the subject vehicles are equipped with a low-pressure fuel pump which may stop operating. If this were to occur, warning lights and messages may illuminate on the instrument panel, and the engine may run rough. This may result in a vehicle stall and the vehicle may unable to be restarted. This can increase the risk of a crash. 5 V. SAFETY PRECAUTIONS • Always remember “SAFETY FIRST”. • When installing/uninstalling the fuel system components, keep safety first in mind and carefully observe the following instructions to avoid fire. • Check each item in the appropriate section for each vehicle. CAUTION: When installing/uninstalling the fuel system components, keep safety first in mind and carefully observe the following instructions to avoid accidents: a. When working on the fuel system, display a Flammable – Keep Fire Away sign. b. Smoking is prohibited nearby. c. Perform this work in an area where there are no sparks nearby from the operation of welders, grinders, drills, electric motors, stoves, etc. d. DO NOT use electrical devices nearby because they can become hot and the operation of power switches can generate sparks. e. DO NOT use iron or steel hammers while working, because they may generate sparks. f. DO NOT start engines even in adjacent stalls. g. Prepare fire extinguishers before starting any work. h. Perform this work in a well-ventilated area (natural ventilation). DO NOT use exhaust fans or electric fans, because their motors might generate sparks. i. Since it is possible for fuel vapor to build up, DO NOT work in or near a pit. j. If fuel is spilled, use shop towels or similar material to quickly wipe it up and then use compressed air to diffuse the fuel vapor. k. Shop towels and other materials that have come into contact with fuel should be dried in a well-ventilated area and then disposed of as appropriate. 6 VI. COMPONENTS 7 8 VII. WORK PROCEDURE 1. CHECK FOR DTC’S a. Using a Techstream, perform a Health Check to check for any Diagnostic Trouble Codes. Note: This Safety Recall covers only the replacement of the fuel pump and associated parts. It does not cover the diagnosis or replacement of any other parts on the vehicle. REMOVAL TIP: AIR VENTILATION Fully open all door glass to prevent the inside the vehicle from being filled with fuel vapor. REMOVAL TIP: FUEL LEVEL If the fuel level inside the fuel tank is above 2/3, fuel may overflow from the fuel tank during the removal of the fuel suction tube assembly. Confirm the fuel level in the vehicle is below 2/3 before proceeding. If necessary, drain fuel from the tank. REMOVAL TIP: SPECIAL TOOL PE/S INSTALLATION To prevent butyl tape from adhering to the surrounding parts, apply special tool PE/S (included in the parts kit) over the butyl tape. 2. DISCHARGE FUEL SYSTEM PRESSURE a. Refer to repair manual instruction FA20 FUEL: FUEL SYSTEM: PRECAUTION; 2017 – 2020 MY 86 [06/2016 – ] 3. DRAIN FUEL (IF NECESSARY) b. Refer to repair manual instruction on FA20 FUEL: FUEL PUMP: REMOVAL; 2017 – 2020 MY 86 [06/2016 – ] 9 4. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 5. REMOVE REAR SEAT ASSEMBLY Refer to repair manual instruction on SEAT: REAR SEAT ASSEMBLY: REMOVAL; 2017 – 2020 MY 86 [06/2016 -] HINT: push rear of seat in to release latch 6. REMOVE FUEL SUCTION TUBE ASSEMBLY a. Refer to repair manual instruction to remove the fuel suction tube assembly. FA20 FUEL: FUEL PUMP: REMOVAL; 2020 MY 86 REMOVAL TIP: PLUG TEMPORARY INSTALLATION To prevent intrusion of foreign matter and fuel flow, install the plug temporary (included in the parts kit) to the fuel tank main tube. REMOVAL TIP: POSITION MARKS Remove the fuel pump gauge retainer making sure that the position mark of the fuel suction plate is within the position marks of the fuel tank assembly. If the parts are not positioned properly, fuel suction tube assembly may interfere with the fuel tank assembly and the fuel suction tube assembly may be damaged, causing malfunction of fuel indicator and fuel leak. 10 REMOVAL TIP: CLAW SET FOR ZN6 Tighten the 4 bolts while firmly pressing the Claw Set for ZN6 against the rib of the fuel pump gauge retainer. REMOVAL TIP: LOOSENING FUEL PUMP GAUGE RETAINER To avoid the Claw Set for ZN6 from interfering with the floor panel, slowly turn the SST handle 180 degrees counterclockwise to loosen the fuel pump gauge retainer. REMOVAL TIP: FUEL PUMP GAUGE RETAINER REMOVAL One person pushes down the fuel suction tube assembly that will be coming up, and the other person slowly loosen the fuel pump gauge retainer with hands. Otherwise, the parts may not be positioned properly and fuel suction tube assembly may interfere with the fuel tank assembly. If interference occurs, the fuel suction tube assembly may be damaged, which could cause a malfunction to the fuel indicator and a fuel leak. 11 REMOVAL TIP: FUEL SUCTION TUBE ASSEMBLY • DO NOT bend the arm of fuel sender gauge assembly. • DO NOT damage the wire harness at edges of service hole when removing the fuel suction tube assembly. DISASSEMBLY TIP: DO NOT DISCONNECT THE HOSE DO NOT disconnect the hose indicated in the illustration. 8. DISASSEMBLE FUEL SUCTION TUBE ASSEMBLY a. Refer to repair manual instruction to disassemble the fuel suction tube assembly. FA20 FUEL: FUEL PUMP: DISASSEMBLY; 2020 MY 86 12 REMOVAL TIP: DO NOT REUSE O-RING During disassembly, the O-Ring may remain in the No.1 fuel sub-tank. Be sure to inspect the No.1 fuel sub-tank after removing the fuel pump and remove the O-ring if necessary. REMOVAL TIP: REUSE FUEL PUMP HARNESS AND SPACER a. DO NOT discard the fuel pump wire harness and fuel pump spacer as they will be reused. b. Discard the removed O-ring. REMOVAL TIP: DO NOT REUSE O-RING a. During disassembly, the O-ring may remain in the fuel pump housing. Be sure to inspect the fuel pump housing after removing the fuel pump assembly and remove the O-ring if necessary. b. Discard the removed O-ring. DISASSEMBLY TIP: DO NOT REMOVE FUEL PRESSURE REGULATOR ASSEMBLY Never remove the fuel pressure regulator assembly from the fuel filter. 13 •• PR OTECTED 関係者外秘 8. REASSEMBLE FUEL SUCTION TUBE ASSEMBLY USING NEW FUEL PUMP ASSEMBLY a. Refer to repair manual instruction to reassemble the fuel suction tube assembly FA20 FUEL: FUEL PUMP: REASSEMBLY; 2017-2020 MY 86 [06/2016-___] REASSEMBLY TIP: DO NOT REUSE FUEL PUMP AND O-RING Be sure to apply engine oil to a NEW O-ring (thick) and install it to the NEW fuel pump assembly. REASSEMBLY TIP: ALIGN HOUSING AND FUEL PUMP Insert the fuel pump assembly into the fuel pump housing aligning the nozzle tip of the fuel pump assembly with the port position that is inside the fuel pump housing. 14 •• PR OTECTED 関係者外秘 REASSEMBLY TIP: FUEL PUMP INSTALLATION • Align the locations of the 5 claws with the fuel pump laid on its side and push in the parts with both hands until the claws engage with a thump at once, preventing the parts from being pushed backwards. • If the parts were pushed back, the O-ring may move out of place and cause the fuel pressure to decrease, causing Malfunction Indicator Lamp (MIL) ON and DTC of system too lean. If the claws were not engaged at once and the parts were pushed back, be sure to disassemble the fuel pump and re-start from installation of the O-ring after making sure that the O-ring is not damaged and deformed. REASSEMBLY TIP: CHECK FUEL PUMP INSTALLATION Confirm that the 5 claws are firmly engaged REASSEMBLY TIP: DO NOT REUSE O-RING Be sure to apply engine oil to a NEW O-ring (thin) and install it to the jet pump. 15 •• PR OTECTED 関係者外秘 REASSEMBLY TIP: CHECK IF PROPERLY ASSEBMLED a. Confirm that each connector is connected and the harness is properly placed at the clamps. b. Confirm that the jet pump is inserted deep enough. c. Confirm that the spring is installed on the fuel tank vent hose sub-assembly side. d. Confirm that the NEW E-ring is installed securely. REASSEMBLY TIP: FUEL TUBE Be sure to pass the 2 fuel hoses under the fuel filter bracket, and be certain to correctly align the upper and lower sections of the fuel suction tube assembly as to not twist the fuel tube. 16 •• PR OTECTED 関係者外秘 e. Confirm that the 3 claws of the fuel filter bracket are securely engaged. 17 •• PR OTECTED 関係者外秘 CLEAN No. 1 FUEL SUB-TANK ASSEMBLY a. Using brake cleaner, clean the No. 1 fuel sub-tank 9. INSTALL FUEL SUCTION TUBE ASSEMBLY a. Refer to repair manual instruction to reassemble the fuel suction tube assembly. FA20 FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION; 2017-2020 MY 86 [06/2016-___] INSTALLATION TIP: CLEAN FUEL SUCTION PLATE AND FUEL TANK c. Clean the top and bottom surface of the fuel suction tube plate with a clean cloth, otherwise, when tightening the fuel pump gauge retainer, the fuel suction tube assembly may turn together and its components may contact the inside of the fuel tank assembly, resulting in damage of the parts d. Clean the installation position of the fuel tank assembly gasket with a clean cloth, otherwise, when tightening the fuel pump gauge retainer, the fuel suction tube assembly may turn together and its components may contact the inside of the fuel tank assembly, resulting in damage of the parts. 18 •• PR OTECTED 関係者外秘 INSTALLATION TIP: TEMPORARY INSTALLATION OF NEW GASKET Temporarily install the NEW gasket to the fuel suction tube assembly side before installing the assembly to the fuel tank. If the gasket is installed to the fuel tank side, it will be harder to install the fuel suction tube assembly. INSTALLATION TIP: PREVENTION OF NEW GASKET MISPLACEMENT a. Insert the fuel suction tube assembly into the fuel tank assembly by performing the removal steps in reverse, and then install the new gasket which was temporarily installed to the fuel suction tube assembly, to the fuel tank assembly. b. To prevent fuel leak, make sure that the gasket is installed without turning over or misplacement at any point. 19 •• PR OTECTED 関係者外秘 INSTALLATION TIP: FUEL SUCTION TUBE ASSEBMLY ALIGNMENT Align the position of the fuel suction plate with the left one of the 3 installation position marks as shown in the illustration. Note: By aligning the position marks this way, when tightening the fuel pump gauge retainer, the fuel suction tube assembly will slightly turn together and its position mark will be within the 3 installation position marks. INSTALLATION TIP: PUT THE RETAINER AROUND THE ARM Put the NEW fuel pump gauge retainer around the arm beforehand so that it is not necessary to change hands when pressing down the fuel suction plate. 20 •• PR OTECTED 関係者外秘 INSTALLATION TIP: ALIGN THE NEW FUEL PUMP GAUGE RETAINER Set the “Δ” mark of the NEW fuel pump gauge retainer to the position shown in the illustration. INSTALLATION TIP: FUEL SUCTION TUBE ASSEBMLY ALIGNMENT To avoid the retainer from turning together with the fuel suction tube assembly, one person pushes down the fuel suction tube assembly that will be coming up, and the other person slowly tightens the fuel pump gauge retainer with hands to make about one full turn of the retainer. REASSEMBLY TIP: FUEL PUMP INSTALLATION To avoid the retainer from turning together with the fuel suction tube assembly, one person pushes down the fuel suction tube assembly that will be coming up, and the other person slowly tightens the fuel pump gauge retainer with hands as tight as possible. 21 •• PR OTECTED 関係者外秘 INSTALLATION TIP: FUEL SUCTION TUBE ASSEBMLY ALIGNMENT One person pushes down the fuel suction tube assembly that will be coming up, and the other person slowly turns the fuel pump gauge retainer to tighten it avoiding the Claw Set for ZN6 from interfering with the floor panel. INSTALLATION TIP: POSITION MARK CHECK Check that the position mark of the fuel suction plate is within the 3 installation position marks of the fuel tank assembly as shown in the illustration. Note: If the position mark of the fuel suction plate is not within the 3 installation position marks, reassemble the parts. 22 •• PR OTECTED 関係者外秘 INSTALLATION TIP: ENGAGEMENT CHECK Using a Vernier caliper, measure the distance from the top surface of the fuel tank assembly to the flange surface of the fuel pump gage retainer at the 3 positions shown in the illustration, and make sure that the difference is within about 3mm. 10. INSTALL FUEL SUCTION ASSEBMLY TUBE a. Refer to repair manual instruction to reassemble the fuel suction tube assembly. Engine / Hybrid System: FA20 FUEL: FUEL PUMP: INSTALLATION; 2020 MY 86 11. INSTALL REAR SEAT ASSEMBLY Refer to repair manual instruction on SEAT: REAR SEAT ASSEMBLY: INSTALLATION; 2017 – 2020 MY 86 [06/2016 -] 12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 13. INSTALL REMOVED FUEL a. If fuel was removed from the tank prior to disassembly, reinstall the originally recovered fuel into the tank. 14. CHECK FOR DTC’S a. Using a Techstream, perform a Health Check to check for Diagnostic Trouble Codes. Note: This Safety Recall covers only the replacement of the fuel pump and associated parts. It does not cover the diagnosis or replacement of any other parts on the vehicle. 23 •• PR OTECTED 関係者外秘 ◄ VERIFY REPAIR QUALITY ► • Confirm no fuel leaks from vehicle • Confirm any fuel drained from the vehicle has been reinstalled • Test drive to confirm normal operation while under load • Confirm no DTC’s are present • Confirm that all parts listed in the Components Diagrams have been properly installed on the vehicle 1919 = 201920 = 202021 = 202122 = 202223 = 2023Etc…Year Campaign is Launched19TA01TT = Toyota L = Lexus Vehicle Make AA = Safety Recall Remedy B = Safety Recall Interim C = Special Service Campaign D = Limited Service Campaign E = Customer Support Program F = Emissions Recall(May use other characters in unique cases)Field Action Category and Phase0101 = 1st Field Action of the year02 = 2nd Field Action of the year03 = 3rd Field Action of the year(The sequence is unique for each Field Action category)(May use other characters in unique cases)Field Action Sequence Examples: 19TA01 = Launched in 2019, Toyota, Safety Recall Remedy Phase, 1st Safety Recall Launched in 2019 20TC02 = Launched in 2020, Special Service Campaign, 2nd Special Service Campaign Launched in 2020 21TE05 = Launched in 2021, Customer Support Program, 5th Customer Support Program Launched in 2021 VIII. APPENDIX A. PARTS DISPOSAL In accordance with Federal law, please make sure all recalled parts (original parts) removed from the vehicle are disposed of in a manner in which they will not be reused, unless requested for parts recovery return. B. CAMPAIGN DESIGNATION DECORDER
**************************************************************************************************************
SEOCONTENT-END
