J0Y – Rear Axle Hub Bearing Bolt Inspection – 2019 Toyota C-HR

NHTSA Campaign Number: 18V710
Manufacturer Toyota Motor Engineering & Manufacturing
Components POWER TRAIN
Potential Number of Units Affected 681

 

Insufficiently Tightened Rear Axle Bearing Bolts

If the bolts loosen and damage the rear brake components, or cause a rear wheel to detach, it would increase the risk of a crash.

 

Summary

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota C-HR vehicles. The rear axle hub bearing bolts may have been insufficiently tightened, causing the bolts to loosen and damage the rear brake components or cause a rear wheel to detach.

 

Remedy

Toyota will notify owners, and dealers will inspect the rear axle hub bearing bolts. If a bolt is found to be loose or detached, the dealer will replace the rear axle hub bearing assembly and rear axle carrier sub-assembly, free of charge. The recall is expected to begin November 9, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota’s number for this recall is J0Y.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall


TECHNICAL INSTRUCTIONS
FOR
SAFETY RECALL J0Y

https://static.nhtsa.gov/odi/rcl/2018/RCRIT-18V710-3714.pdf

Download (PDF, 219KB)


Recall Acknowledgement

October 22, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V710-9505.pdf

Download (PDF, 274KB)


Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V710&docType=RCL


 

SaleBestseller No. 1
TEKTON 24335 1/2" Drive Click Torque Wrench (10-150'.-Lb./13.6-203.5 Nm)
  • Wrench emits click that can be heard and felt when the preset value is reached
  • High-contrast dual-range scale is easy to read, even in low light. Product Dimensions - 18.5 x 1.9 x 1.4 inch
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
  • Ships pre-calibrated to +/- 4% accuracy and ready to use
SaleBestseller No. 2
Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance
  • ACCURACY: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%
  • EASE OF USE: Apply, repeatable, accurate torque settings to scope rings, guard screws, windage screws and base screws, which aids in accuracy and decreases the opportunity for problems in the field
  • RELIABLE: Torque adjustment range from 10 in/lbs to 65 in/lbs
  • DURABLE: Bits are made of S2 tool steel and hardened to 56-58 Rockwell "C"
  • INCLUDES: 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 torx, T15 torx and Leupold specialty flat blade), ¼" socket and a convenient plastic storage case
SaleBestseller No. 3
TACKLIFE 3/8" Drive Click Torque Wrench Set,With 1/2" & 1/4" Adapters And An Extension Bar (10-80 ft.- lb./13.6-108.5 Nm) - HTW1A
  • 【ACCURACY】:Each torque wrench passed the calibration according to DIN-ISO-6789(international standard) within +/- 4%
  • 【HIGH QUALITY】:All steel construction make it lightweight and compact,laser engraving dual-range scale improves numeral clarity
  • 【CLICK WRENCH】: A click, which can also be felt by the operator through the grip, warns when the required torque is reached
  • 【REVERSIBLE RATCHET】: Clockwise & Counter-clockwise suitable for restricted spaces,measures torque in clockwise direction
  • 【UPGRADED ACCESSORIES】:A good all around wrench come with 2.95-inch extension bar, and 1/2"&1/4"adapters
SaleBestseller No. 4
Neiko 00206A 1/2 Inch Drive Premium Breaker Bar, 24" Length | Cr-V Steel
  • 24 Inch extra long chrome vanadium steel handle provides maximum torque
  • Forged and heat treated chrome-moly 1/2" drive head for added strength and durability
  • 180-degree flexible head works at any angle, to reach around tight space and generate optimized leverage
  • Spring-load ball bearing holds sockets securely
  • Ideal to break and loosen rusted, stubborn or stuck nuts and bolts
Bestseller No. 5
EPAuto 1/4-Inch Drive Click Torque Wrench (20-200 in.-lb. / 2.26~22.6 Nm)
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V)
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
  • Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Simple and Reliable: "Click" sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
Bestseller No. 6
EPAuto 1/2-inch Drive Click Torque Wrench, 10~150 ft./lb, 13.6~203.5 N/m
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V)
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
  • Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Simple and Reliable: "Click" sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
SaleBestseller No. 7
TEKTON 24330 3/8-Inch Drive Click Torque Wrench (10-80 ft.-lb./13.6-108.5 Nm)
  • Wrench emits that can be heard and felt when the preset value is reached
  • High-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
  • Ships pre-calibrated to +/- 4% accuracy and ready to use
Bestseller No. 8
EPAuto 3/8-Inch Drive Click Torque Wrench (10-80 ft.-lb. / 13.6-108.5 Nm)
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V)
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
  • Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Simple and Reliable: "Click" sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
Bestseller No. 9
TEKTON 24340 1/2-Inch Drive Click Torque Wrench (25-250 ft.-lb./33.9-338.9 Nm)
  • Length : 26 inches;Width : 3 inches ;Height :2.5 inches
  • High-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
  • Ships pre-calibrated to +/- 4% accuracy and ready to use
SaleBestseller No. 10
TEKTON 24320 1/4-Inch Drive Click Torque Wrench (20-200 in.-lb./2.26-22.6 Nm)
  • Wrench emits that can be heard and felt when the preset value is reached
  • High-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
  • Ships pre-calibrated to +/- 4% accuracy and ready to use

Last update on 2019-08-17 / Affiliate links / Images from Amazon Product Advertising API

Last update on 2019-08-17 / Affiliate links / Images from Amazon Product Advertising API

Leave A Comment

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.