| “This site contains affiliate links for which OEMDTC may be compensated” |
TECHNICAL INSTRUCTIONS
FOR
SAFETY RECALL J0A/J0B/J0C
FRONT PASSENGER AIRBAG INFLATOR MODULE
CERTAIN 2002 –2007 MODEL YEAR SEQUOIA
Update 10/17/2019
Update 10/17/19
− The model year has been expanded to 2007 model year
Update 6/9/19
− The scanning process has been updated Update 12/20/18
− The inflator installation procedure has been updated Update 12/18/18
− Images have been updated to reflect the new parts
BACKGROUND
The subject vehicles are equipped with front passenger airbag inflators produced by Takata. The propellant in these inflators may degrade after prolonged exposure to high absolute humidity and fluctuating high temperatures. Degraded propellant can cause the inflator to explode during airbag deployment. In the event of an inflator explosion, metal fragments could pass through the airbag cushion material, striking the vehicle occupants, and result in serious injury or death.
PARTS
| Model Year | Part Number | Part Description | Quantity | ||||||
| 2002-2004 Sequoia | 04008-03712 | INFLATOR ASSY KIT, INSTR PNL AIR BAG* | 1 | ||||||
*The kit above includes the following parts.
| |||||||||
| Model Year | Part Number | Part Description | Quantity |
| 2005-2007 Sequoia | 04008-10112 | AIR BAG ASSY KIT, INSTR PNL PASS | 1 |
SEOCONTENT-START
TECHNICAL INSTRUCTIONS
FOR
SAFETY RECALL J0A/J0B/J0C
FRONT PASSENGER AIRBAG INFLATOR MODULE
CERTAIN 2002 –2007 MODEL YEAR SEQUOIA
Update 10/17/2019
Update 10/17/19
− The model year has been expanded to 2007 model year
Update 6/9/19
− The scanning process has been updated
Update 12/20/18
− The inflator installation procedure has been updated
Update 12/18/18
− Images have been updated to reflect the new parts
All dealership technicians performing this recall are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this recall repair are required to have successfully completed E-Learning course SC18A (if you had previously completed E-Learning Course SC13B, you do not have to take SC18A), in addition to “Safety Recall and Service Campaign Essentials”, and currently hold at least one of the following certifications levels:
• Toyota
Certified (Electrical)
• Toyota Expert (Any Specialty)
• Master
• Master Diagnostic Technicians
2
I. OPERATION FLOW CHART
The flow chart is for reference only. DO NOT use it in place of the full technical instructions. Follow ALL steps as outlined in the full technical instructions to confirm the campaign is completed correctly.
3
II. BACKGROUND
The subject vehicles are equipped with front passenger airbag inflators produced by Takata. The propellant in these inflators may degrade after prolonged exposure to high absolute humidity and fluctuating high temperatures. Degraded propellant can cause the inflator to explode during airbag deployment. In the event of an inflator explosion, metal fragments could pass through the airbag cushion material, striking the vehicle occupants, and result in serious injury or death.
III. IDENTIFICATION OF AFFECTED VEHICLES
A. INVOLVED VEHICLES
• Check the TIS Vehicle Inquiry System to confirm the VIN is involved in this Safety Recall, and that the campaign has not already been completed prior to dealer shipment or by another dealer.
• TMS warranty will not reimburse dealers for repairs conducted on vehicles that are not affected or were completed by another dealer.
4
IV. PREPARATION
A. PARTS
Model Year
Part Number
Part Description
Quantity
2002-2004 Sequoia
04008-03712
INFLATOR ASSY KIT, INSTR PNL AIR BAG*
1
*The kit above includes the following parts.
Inflator
1
Self Locking Nut
4
Electro Tap
1
Model Year
Part Number
Part Description
Quantity
2005-2007 Sequoia
04008-10112
AIR BAG ASSY KIT, INSTR PNL PASS
1
Non-Desiccated Part Recovery
Dealers should discontinue the installation of the non-desiccated parts listed below for recall, customer pay repairs AND over-the-counter sales (if applicable).
Model
Model Year
Location
Part Number
Part Description
Qty
Sequoia
2002-2004
48 States in Continental U.S.
04003-2810C
INFLATOR ASSY KIT,
INSTR PNL AIRBAG
1
USTT, Hawaii & AK
04003-1110C
2005-2007
48 States in Continental U.S.
04004-7520C
USTT, Hawaii & AK
04004-7510C
Model
Model Year
Part Number
Part Description
Sequoia
2002-2004
73970-0C020-B0
73970-0C020-B1
73970-0C020-E0
AIR BAG ASSY,
INSTR PNL PASS
2005-2007
73970-0C021-B0
73970-0C021-B1
Toyota requires all dealers to return any parts listed above that still remain in dealer inventory by utilizing the Hazmat Part Return Program available. Dealers will be issued a refund for all part returns. This part return program is outlined in PANT Bulletin 2014-042.
Important Note:
In order to return the inflator, packages must NOT be opened/tampered with.
5
A. TOOLS & EQUIPMENT
• Standard hand tools
• Torque wrench
• Electrical Tape
• Molding remover set
• Techstream
• Zip Tie
OPTIONAL SST – This is an essential special service tool that the dealership should have. This tool is not mandatory when performing this repair.
Part Number
Part Name
Quantity
09890-47010-01
Anti-Static Mat Set
1
E04 CAMPAIGN TOOLS – These tools where previously provided to the dealership for campaign D0F and will be used for campaign E04. These tools are required when performing this repair.
Image
Name
Quantity
Airbag Mounting Bracket & hardware
1
Barcode Scanner
1
NOTE: These tools CANNOT be ordered through the parts or tools system. There is a very limited supply of tools, but if additional tools are needed, contact your regional representative.
6
V. SAFETY PRECAUTIONS
CRITICAL INFORMATION – READ THOROUGHLY
Failure to follow these procedures correctly could cause the SRS to unexpectedly deploy during servicing or the SRS may fail to operate correctly when required after reassembly. Confirm all work is performed as described in these instructions.
1. ELIMINATE STATIC ELECTRICITY
a) Before starting work and periodically while working on the vehicle, touch a metallic part of the vehicle to discharge static electricity in the body.
2. DO NOT MEASURE RESISTANCE
a) DO NOT measure resistance of airbag components, this may cause accidental activation.
3. HANDLE THE AIRBAG CAREFULLY
a) If an inflator is dropped, replace it with a NEW inflator.
4. DO NOT ALLOW FOREIGN OBJECTS NEAR AIRBAG
a) Be sure to collect and account for all removed nuts/bolts to prevent them from landing in the airbag assembly.
b) Any foreign objects in the airbag assembly may cause damage or injury if the airbag is activated.
5. WEAR PROTECTIVE EQUIPMENT
a) Always wear appropriate protective equipment when working on the SRS.
7
VI. SRS SYSTEM HEALTH CHECK
1. PERFORM A HEALTH CHECK
a) Confirm the Techstream is connected to the dealership’s internet.
b) When launching the Techstream software the VIN MUST be entered manually.
NOTE: All letters of the VIN MUST be entered in ALL CAPS, or the VIN will need to be reentered when running the diagnostic report.
c) Perform a health check.
Note: The VIN may auto populate on the later model year vehicles, if this happens DO NOT change the VIN.
2. RUN A DIAGNOSTIC REPORT
a) After the health check has completed, run a diagnostic report by clicking on the link on the health check screen.
NOTE: If the VIN was not entered in ALL CAPS when Techstream was launched, an error will be displayed and there will be a prompt to reenter the VIN
b) Enter the vehicle mileage and repair order information, then click the ‘report’ button.
• The VIN MAY NEED to be entered manually in ALL CAPS when launching the Techstream software. The VIN MAY NOT auto-populate on vehicles prior to the 2006 MY.
• A health check and diagnostic report with VIN MUST be performed within the last 36 hours and recorded by TMS. If the diagnostic report is not run, the healthcheck will not be recognized by TMS.
• The serial number checker application will be disabled and the inspection cannot be completed if a health check and diagnostic report is not performed and recorded by TMS.
8
VII. INSPECT INFLATOR TYPE
1. REMOVE THE GLOVE BOX AND FINISH PANEL
a) Remove the 2 screws and the glove box.
b) Remove the 3 screws, disconnect the courtesy light connector and remove the lower No.2 finish panel that is behind the glove box.
2. INSPECT INFLATOR TYPE
a) Inspect the inflator to determine if it has a large nut on the right side as shown.
NO: Proceed to section VIII.
YES: The vehicle is NOT INVOLVED in the Safety Recall.
Reinstall the glove box and return the vehicle to the customer.
Hex nut
9
VIII. WORK AREA PREPARATION
CRITICAL INFORMATION – READ THOROUGHLY
The bracket assembly that was provided at the launch of SSC D0F is a critical added-safety feature that MUST be used when replacing the inflator module. Confirm the bracket assembly is installed securely in the vise and confirm the work area being used is appropriate. The anti-static mat set that is an essential SST may be available at your dealership and is optional to use during inflator replacement. If the anti-static kit is not available, before starting work and periodically while working on the vehicle, touch a metallic part of the vehicle to discharge static electricity in the body.
If the anti-static kit is not available, before starting work and periodically while working on the vehicle, touch a metallic part of the vehicle to discharge static electricity in the body.
10
IX. FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL
1. DISCONNECT THE NEGATIVE BATTERY CABLE
• Wait at least 90 seconds after disconnecting the cable from the negative battery terminal to prevent airbag and seat belt pre-tensioner deployment.
• Follow all precautions as outlined on TIS before servicing the SRS system.
2. REMOVE THE PASSENGER AIRBAG ASSEMBLY
a) Refer to TIS for airbag removal instructions:
2002-2005
2006
2007
b)
Sequoia
11
<Caution!>
The inflator wire harness has been
connected to the new inflator.
Don’t remove the wire harness from the inflator.
12
3. LAUNCH THE SERIAL NUMBER RECORDING APPLICATION
• The AIRBAG ASSEMBLY, ORIGNAL INFLATOR, and NEW INFLATOR serial numbers MUST be recorded using the barcode scanner (provided at the launch of SSC D0F).
• The barcode scanner application MUST be completed on every vehicle. These numbers MUST be included on every warranty claim that is submitted for inflator module replacement or the claim may be subject to debit.
• The technician performing the work MUST have valid TIS login credentials and an internet connection to perform the inspection and scanning process.
a) Log in to TIS and input the VIN of the vehicle in the Vehicle Inquiry tab.
b) Confirm the VIN is applicable and that the campaign has not been completed.
c) Click on the link to launch the serial number recording application.
d) Reenter TIS password in the serial number recording application.
NOTE: The person logged-in to TIS MUST be the person performing the repair.
e) Record the vehicle mileage into the serial number recording application.
NOTE:
• A task status screen will populate next and at other intervals during the repair. This screen will indicate if the inflator was replaced or in some limited cases that the entire airbag assembly was replaced. Click ‘next’ to proceed to the next step. This information will be used for record keeping by TMS.
• If this screen indicates that the campaign has already been completed on this VIN, there is no need to perform campaign again.
4. CONNECT THE BARCODE SCANNER
• Connect the barcode scanner to the USB port on the Techstream.
• The scanner will automatically connect and a beep will be heard when the scanner is ready.
NOTE:
• The scanner was provided for SSC D0F.
• The barcode scanner works best in low light conditions.
• Always hold the scanner directly in front of and parallel to the barcode label.
13
5. SCAN THE AIRBAG SERIAL NUMBER
ATTENTION: This information is CRITICAL
a) Scan the AIRBAG ASSEMBLY serial number 2 times.
1) Confirm the cursor is in the first serial number box then scan the serial.
2) Position the cursor in the second serial number box then scan the serial.
b) Click next.
NOTE:
• If both serial numbers that are entered do not match, confirm and reenter.
• If the serial number barcode will not scan, it can be entered manually.
AIRBAG SERIAL NUMBER IDENTIFICATION
• The airbag serial number is ALWAYS the 12 DIGITS located between the asterisks.
• The 3 digits before the asterisk ARE NOT part of the serial number, and SHOULD NOT be entered or an inaccurate response may be returned.
Airbag Serial Number Label Example
The AIRBAG ASSEMBLY serial number and the INFLATOR serial number are DIFFERENT. The AIRBAG ASSEMBLY serial number MUST be recorded prior to replacement.
14
AIRBAG ASSEMBLY SERIAL NUMBER FOR 2005 MY SEQUOIA (OR IS MISSING OR IS UNREADABLE)
If the airbag serial number and barcode are not legible or are not present, check the box in the application indicating the serial number is not legible and contact your regional representative.
a) If the airbag serial number cannot be scanned or is not present check the box as shown below.
Checking this box requires Air Bag Assembly replacement.
**Note** Contact your region in the event
that you are unable to read the serial number.
DO NOT ATTEMPT TO INSTALL INFLATOR
15
b) After the Region approves the Airbag Assembly replacement and the new part is received, scan the NEW airbag barcode in the Serial Number Recording Application.
The new AIRBAG ASSEMBLY serial number MUST be recorded prior to reinstallation to track the airbag assembly to the vehicle.
16
X. INFLATOR REPLACEMENT ONLY FOR 2002 – 2004 MY SEQUOIA
CRITICAL INFORMATION – READ THOROUGHLY
The connector of the inflator module contains a short circuiting mechanism to eliminate voltage variances when the connector(1) is disconnected. To allow for the replacement of the inflator module, a new short circuit(2) MUST be created before cutting the wires(3) and removing the inflator. The following steps MUST be followed exactly as described to ensure the work is completed correctly and safely.
17
1. MOUNT THE AIRBAG IN THE MOUNTING BRACKET
a) Position the airbag assembly so that the center mounting bracket is facing towards the ground.
b) Install the airbag to the support bars with the bolts supplied in the bracket kit.
NOTE: The airbag assembly will only fit on the support brackets one way.
c) Position the airbag so that all four stopper plate nuts can be removed through the access holes.
d) Tighten the bolts holding the support bars to the mounting bracket.
e) Confirm the following:
• Mounting bracket is secure in the vise.
• Airbag is secure in the support bars.
• The center mounting bracket on the airbag assembly is facing downward.
• Support bars are secure on the mounting bracket using 1 bolt/nut at the top of each support bar and 2 nuts/bolts at the bottom of each support bar.
CRITICAL INFORMATION – READ THOROUGHLY
ALWAYS keep as much of your body as possible in front of the bracket when working on the airbag assembly.
Remember to periodically touch a metallic part of the vehicle to discharge static electricity in the body if the anti-static kit is not being used.
2. PREPARE TO INSTALL THE SHORT CIRCUIT
a) Cut the yellow corrugated tube on the harness approximately 4 inches (10 cm) using nippers.
• DO NOT damage the wires in the tube.
• DO NOT use a knife or razor blade to cut the tube to avoid damaging the wires.
• This may be performed on either end of the inflator.
b) Cut off the tab of the electro tap shown in the illustration.
NOTE: The electro tap is included in the inflator parts kit.
This tab MUST be removed to ensure a good short.
18
3. CREATE A NEW SHORT CIRCUIT IN THE INFLATOR HARNESS
a) Place one wire in the electro tap as shown in the illustration.
b) Fold and pinch the half of the electro tap with the wire and use pliers to lock the electro tap.
NOTE:
• DO NOT work on both wires at the same time to avoid errors.
• Pliers MUST be used to confirm the electro tap is firmly locked in place.
c) Set the other wire in the electro tap and lock it in place using pliers.
DO NOT measure resistance of the inflator wires, this may cause accidental activation.
4. CUT THE INFLATOR WIRES
a) Cut the 2 wires at the side of the electro tap that is farthest away from the inflator.
Cut the wires opposite the inflator
DO NOT measure resistance of the inflator wires, this may cause accidental activation.
19
5. REMOVE THE SELF LOCKING NUTS
a) Use the access holes in the bracket to remove the 4 nuts.
NOTE:
• DO NOT use power tools.
• The bracket support bars may need to be repositioned to remove the nuts through the access holes.
b) Remove the stopper plate and place in a secure location because it will be reused.
DO NOT discard the Stopper Plate, it will be reused.
c) Discard the 4 nuts as they are not to be reused.
NOTE: DO NOT reuse the old nuts, new nuts MUST be used.
6. REMOVE THE INFLATOR
a) Gently push in the 4 studs to loosen the inflator for removal.
b) Remove the inflator from the airbag assembly and place it on a safe work surface.
20
ENSURE YOU ENTER BOTH THE OLD AND NEW INFLATOR SERIAL NUMBERS IN THE APPROPRIATE SPOT OF THE APPLICATION
-DO NOT ENTER THE AIRBAG SERIAL NUMBER FOR THIS STEP-
7. SCAN THE OLD AND NEW INFLATOR SERIAL NUMBER
a) Scan the OLD inflator serial number and mark the old inflator so that it will not be reused.
b) Scan the NEW inflator serial number.
ATTENTION: This information is CRITICAL
• It is used to confirm the correct inflator is removed from the vehicle.
• It is recorded by TMS to trace the return parts shipment.
• It is used to track the new inflator that is being installed in the vehicle.
Depending on the serial data scanned during a previous Takata repair, you may NOT be asked to enter an Original Inflator Serial Number
21
c) If the inflator serial number cannot be scanned or is not present check the box as shown below.
Checking this box requires Air Bag Assembly replacement.
**Note** Contact your region in the event
that you are unable to read the serial number.
DO NOT ATTEMPT TO INSTALL INFLATOR
NOTE: The NEW AIRBAG ASSEMBLY serial number MUST be scanned prior to reinstallation to track the airbag assembly to the vehicle (refer to page 14).
d) Confirm agreement by checking the two boxes.
e) Record the Warranty Authorization # to be included in the warranty claim.
f) Place the old inflator in the parts box and take it immediately to the parts department.
NOTE:
• Confirm the cursor is in the correct serial number input box before scanning.
• If the serial number barcode will not scan, it can be entered manually.
• If there are any difficulties or concerns with this process, email quality_compliance@toyota.com with details.
22
Step d)
Step e)
8. REMOVE NEW INFLATOR CONNECTOR COVER
a) Carefully use a pocket screwdriver to disengage the first release tab as shown in the image
b) Carefully use a pocket screwdriver to disengage the second release tab as shown in the image
c) Open the connector cover. Once open carefully use a pocket screwdriver to disengage the release tab and remove the connector cover from the connector
23
9. INSTALL THE NEW INFLATOR
a) Route the inflator wire harness through the stopper plate
b) Carefully slide the new inflator into the airbag assembly.
c) Confirm the harness is not pinched by the stopper plate
10. REINSTALL THE INFLATOR CONNECTOR COVER
d) Install the connector into the connector cover. Ensure the release tab on the connector is engaged into the connector cover.
e) Once the connector is installed into the connector cover, close the connector cover over the connector.
f) Wrap electrical tape around the connector to prevent the connector from opening.
24
11. CONFIRM THE INFLATOR ALIGNMENT
a) Align the flat on the inflator with the flat on the airbag assembly bracket.
Confirm the flats on the airbag assembly and inflator are aligned.
12. REINSTALL THE STOPPER PLATE.
g) Place the stopper plate on the airbag assembly.
The inflator stopper plate is reused at this step; a new one is not included in the inflator kit.
h) Install stopper plate nuts (NEW) by hand. They will be torqued on a later step.
i) Install the NEW nuts on the airbag assembly bracket by hand. They will be torqued on a later step.
13. TORQUE THE PLATE NUTS
a) Tighten the nuts evenly in two increments following the sequence shown in the illustration. Use a socket driver or torque wrench to tighten the nuts.
Torque: 35in. lbf (3.9N∙m)
• There will be some resistance when tightening the nuts because they are self-locking, confirm the nuts are tightened correctly.
• DO NOT use a power tool, T-handle, or ratchet when tightening the nuts to avoid over torqueing.
25
14. REMOVE THE AIRBAG ASSEMBLY FROM THE BRACKET
a) Remove the two bolts and the airbag assembly, then place the assembly on a cloth or the anti-static mat if it being used.
15. INSPECT THE AIRBAG BEFORE INSTALLATION
a) Confirm that the 4 NEW nuts are installed and tight.
b) Confirm the stopper plate is reinstalled.
c) Confirm the flats on the airbag assembly bracket and inflator are aligned.
d) Confirm the inflator harness connector is secure and installed in the correct direction.
e) Confirm that the harness is engaged in the clamp.
26
XI. FRONT PASSENGER AIRBAG ASSEMBLY INSTALLATION
1. REINSTALL THE AIRBAG ASSEMBLY
Note: During reinstallation of the airbag assembly, ensure the 12mm bolt and two 10mm nuts securing the airbag assembly to the instrument panel are installed and torqued to the required specification identified on TIS.
c) Refer to TIS for installation instructions:
2002-2005
2006
2007
2. RECONNECT THE NEGATIVE BATTERY CABLE
3. PERFORM A HEALTH CHECK AND DIAGNOSTIC REPORT
NOTE: Enter the VIN when performing the health check in order for the data to be recorded by TMS.
◄ VERIFY REPAIR QUALITY ►
− Confirm all precautions are follow to ensure safety during the repair
− Confirm the entire serial number checker application is completed and the warranty authorization # is recorded on EVERY vehicle
− Confirm the old inflator is handled safely and given to the appropriate parts professional for shipment
− Confirm the inflator harness connector is fully engaged and that the stopper plate is installed correctly
If you have any questions regarding this update, please contact your area representative.
XII. APPENDIX
A. CAMPAIGN DESIGNATION DECODER
C0TYear Campaign is Launched8 = 20089 = 2009A = 2010B = 2011C = 2012 D = 2013E = 2014F = 2015Etc…Repair Phase1st Campaign = A2nd Campaign = BEtc…Current Campaign Letter for this year 0 = Remedy1 = Prelim/Interim 2 = Prelim/Interim for Phase 2 Vehicles(Remedy not yet available) “1 or 2” will change to “0” when the Remedy is available
B. CAMPAIGN PARTS DISPOSAL
ALL inflators that are removed from vehicles under this campaign MUST be packaged and shipped back to the inflator manufacturer following the manufacturer’s instructions. The instructions can be found in the following locations:
• Attached to the dealer letter
SEOCONTENT-END
Remedy Instructions and TSB
RCRIT-19V741-0379.pdf 3729.646KB
Loading...
Reload document 
Open in new tab
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix & View Live Data] - Much more than a car code reader, BlueDriver is a diagnostic tool. You’ll get unlimited repair reports with possible causes and fixes, plus real-time health monitoring while you drive with the live data feature.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
- [Easy to Use--Work out of box] + [FOXWELL 2025 New Version] FOXWELL NT604 Elite scan tool is the 2025 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- [Affordable] + [Reliable Car Health Monitor] Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- [5 in 1 Diagnostic Scanner] Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it. Note: doesn't support maintenance function.
- [Fantastic AUTOVIN] + [No extra software fee] Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- [Solid protective case KO plastic carrying bag] + [Lifetime update] Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet. To connect the tool to the App, please DO NOT go to device's Bluetooth settings, instead, open RepairSolutions2 App and follow the instructions on the App to pair the BLCKTEC 430.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- [ABS Diagnosis] - Quickly identify and resolve ABS-related issues, including sensor faults (such as wheel speed sensors), wiring problems (faulty circuits or connectors within the ABS system), or ABS pump failures (malfunctions in the ECU controlling the ABS). Ensure proper system operation, restore optimal braking performance, and clear any warning lights.
- [SRS Diagnosis] - Quickly detect the airbag ECU itself, airbag sensor failure, airbag system plug disconnection or poor contact, seat belt sensor failure, or system error, etc, to ensure that the SRS (Supplemental Restraint system) is working properly. After repair, reset the system to clear the warning light and restore full safety performance. NOTE: It cannot reset Airbag crash or transmission codes.
- [Full OBD2 Function] - Read and clear trouble codes for all OBD2 systems, including show real-time data, freeze frame data, I/M Readiness, DTC lookup, test results for o-xygen sensor, On-board monitor test, request vehicle information, component test, modules present and e-vap test. Allowing you to quickly identify and troubleshoot vehicle issues.
- [AutoVIN Technology] - It simplifies diagnostics by automatically identifying the vehicle’s model and configuration, eliminating the need for manual input, and ensures accurate diagnostics by applying the correct data and algorithms, reducing errors caused by manual entry. Improves efficiency and streamlines the diagnostic process.
- [ABS Auto Bleeding] - Helps bleed your vehicle's Anti-lock Braking System (ABS), removing air from the brake lines to ensure optimal brake performance. It helps prevent brake issues such as spongy pedals, inconsistent braking, and reduced stopping power, and enhances vehicle safety by ensuring the ABS system is working properly, especially during critical driving situations. NOTE: It’s not compatible with vehicles that only support manual bleeding.
- Pro-level ABS SRS OBD2 Scanner - Based on the NT301 FOXWELL Scanner, this car scanner takes OBD-II diagnostics to the next level by in-depth insights on reading ABS SRS Diagnostic Trouble Codes, display the Live Data: Wheel Speed Sensor, Airbag Issues, Wiring Faults, clear the ABS error codes after the car faults repaired, etc... NOTE: This code reader can only read SRS codes but CANNOT reset any Airbag crash codes. Please check the functions coverage BEFORE purchasing. NO Need to Register &Subscription.
- Full-Feature ABS Diagnostics - Real-time tracking of wheel speed sensor, brake force distribution, and brake pressure with dynamic graphs for easy analysis. Effortlessly read ABS trouble codes and access freeze frame data to identify and resolve system issues. This ABS scanner diagnostic tool also monitors ABS performance during emergency braking or on slippery surfaces, providing alerts for potential problems.
- Basic OBDII Scanner Functions - This obd2 scanner diagnostic tool also can Check Engine Fault Light, diagnose OBD-II modules instantly, display the Live Data with graph (engine RPM, coolant temperature, fuel trim, and sensor readings), locate bad sensors and indicate I/M readiness status before the annual inspection. Reducing the potential driving risk and keep a peak performance on the road.
- Top ABS Bleed Scan Tool - After replacing the ABS pump or adding brake fluid, air can enter the ABS module, causing the pedal to feel weak or slow to return. This OBD2 scanner with ABS auto bleed will restore your brake pedal’s firmness by efficiently removing air from the ABS module. For vehicle coverage, check the FOXWELL Diagnostic Coverage List under Support on the official site. NOTE: This feature is NOT compatible with vehicles that support manual bleed.
- User-Friendly & Budget-Friendly - Enjoy software updates without subscription for newer vehicle models(Any more issues about update, please let us know）. This car code reader comes with a sturdy case for easy carrying. The code reader for cars will also save diagnostic data to avoid unnecessary diagnostic costs when you must to find the professional mechanic to fix the car faults instead of addressing them by yourself.
- 2025 FOXWELL Scanner NT716: New Bidirectional Scan Tool – Get active test capabilities for ABS, Airbag, Transmission, and Engine systems, easily perform various tests such as injectors, Cooling Fan, Fuel Pump, etc.The price of $ 200+ enjoys a $ 300-500 code reader service! With the NT716 Scanner Diagnostic Tool, You only need to plug in the device to accurately obtain real -time data information. To understand whether your car's system actuator is normal, prevent danger in advance, and drive with confidence. 👉P.S. The active test function needs to be upgraded before it can be used.
- 4-System Car Scanner for ABS, Airbag, Transmission, and Engine – Easily read error codes and ECU information, view 4-in-1 live data, and save or download data for later reference. The built-in DTC library explains fault codes clearly, and once issues are fixed, you can clear codes and turn off warning lights with just one tap. FOXWELL NT716 Code Scanner empowers you to handle most diagnostics on your own, saving you time and money instead of relying on an elusive mechanic.
- 9 Reset Functions – Unlike other obd2 scanner diagnostic tools in this price range that offer only 5–7 resets, FOXWELL NT716 scan tool supports 9 essential reset functions, including ABS Bleeding, SAS, Oil Light, EPB, BMS, DPF, Throttle Relearn, Injector Coding, and TPMS. You can monitor the running status of various systems of the car by live data flow, identify potential problems, reset system data, and extinguish the flashing oil lamp fault light! ❗Notice:This product does NOT have special functions for car k-ey p-rogramming.
- Full OBD2 Scanner with Plug-and-Play – Enjoy comprehensive OBDii functions, including AutoVIN for automatic vehicle info recognition, one-click I/M Readiness for emissions checks, real-time data, and freeze frame capture… Scanner FOXWELL NT716 makes it easy to prepare for annual inspections, helping you stay road-ready with confidence each year.
- 5.5" HD Touchscreen Tablet Diagnostic Scanner– Get rid of the confusion caused by the 2.8" scanner with multi - button operation; Built -in 4000mAh battery, the new version of the battery life is greatly enhanced; No subscription fee, no additional charges, share reports anytime, one - click free WiFi upgrade; Android 9.0 system, 24+language , support 100+ car brands from 1996 to 2025.
- 【UPGRADE OF NT604-POWERFUL 5 RESETS】Wanna to do maintenance service for your car however the basic 4 system scanner tool can't do it? Then FOXWELL NT614 Elite-the upgraded version of nt604, was born for providing you with 5 special functions-ABS Bleeding/Oil Reset/SAS Calibration/EPB Reset/Throttle Reset. These functions are enough for your daily needs. No need to buy those 300-600 dollors obd2 scanner. Saving your unnecessary repair fee with FOXWELL nt614 car scanner diagnostic tool!
- 【ENGINE/ABS/SRS/TRANSMISSION CODE READER】Don't know what's wrong with your car when the warning light of ABS, transmission, SRS, Engine flashes? NT614 Elite obd2 scanner can pinpoint the problem components. It boasts many functions of engine, abs, srs and transmission such as read & erase fault codes and grapgh live data like engine temp, wheel speed sensor, read transmission temperature, etc. Compared with car repairs, using foxwell nt614 elite is more convenient and a-ffordable.
- 【Best Bang For Your Buck!-FOXWELL NT614 Elite】1. 2025 New software-faster than old one. 2. One click lifetime WIFI f-ree update, no need to use the annoying Micro SD card. 3. New Update-No need to register on the FOXWELL website before use, more convenient! 4. More intuitive viewing with new interface, you can find I/M, Battery Test, DTC Lookup directly.
- 【ABS BLEEDING OBD SCANNER】Do you always feel the brake pedal was slowly sinking to floor or it's loose after doing a complete front & rear brake job? And then you need to take more time than normal to stop your car, which is very dangerous. That's because when you open the brake system to replace components, air gets inside. To get a firm brake pedal, the air need to be removed by bleeding the brakes. NT614 Elite odb2 scanner can do ABS BLEEDING perfectly for your cars.
- 【SMART AUTOVIN & LIFETIME F-REE WIFI UPDATE & PERFECT GIFT CHOICE】With the fantastic AUTOVIN function, this nt614 scan tool can get your VIN and vehicle info rapidly. No need to spend much time in finding your VIN and input it one by one. Also, the lifetime f-ree wifi update is provided for more vehicle coverage, bug fixes, newly added parameters. SAVE AT LEAST 1000+ PER YEAR. And this automotive scanner is a best gift for your Dad, Husband, Boyfriend and Handy Men.
- All New AD610 Pro - This remarkable tool has entirely new technology. Unlike other OBD2 scanners that merely support USB upgrades on PC and demand registration, ours offers WiFi updates without any registration requirements, thus saving 90% of the time it takes. Additionally, the operating speed of our new software has increased by 30% and the vehicles' compatibility has risen by 20%. The compatibility depends year and model, please inform VIN for compatible check.
- ABS Diagnosis & Reset - Effectively read and clear ABS error codes or reset ABS-related sensors after repairs. Addresses issues such as front or rear wheel speed sensor failure, sensor voltage irregularities, steering angle sensor faults, yaw rate, or G sensor malfunctions. Ensure safe driving with reliable system performance.
- SRS Diagnosis & Reset - Read and clear SRS error codes or reset SRS-related sensors after repairs. Resolves issues like crash data recorded on the driver side (airbag replacement required), occupant classification system defects, or seat track position sensor malfunctions. Helps avoid airbag failure in an accident.
- Optimal ABS Bleed, Smooth Braking - When there's air in the ABS, it affects braking performance. Our tool helps auto bleed the brake system by purging the air, ensuring no air bubbles in the brake lines, for proper operation and optimal performance. This maintenance task is typically done when replacing brake fluid or servicing brake components, to ensure braking system stability and reliability. Note: this feature is not compatible with vehicles that only support manual bleeding.
- SAS Calibration Essential - Enjoy precision steering and enhanced safety through our SAS calibration feature. By ensuring accurate alignment of your vehicle's steering angle sensor (SAS), SAS calibration delivers precise control, eliminates steering drift, and prevents uneven tire wear. Improve handling and maneuverability on the road, even in challenging conditions, while driving with confidence knowing that your steering system is finely tuned for maximum performance and safety.
- [Brand-New ArtiDiag500] We've got everything you're looking for! Forget basic OBD2 scanners; TOPDON's ArtiDiag500 car scanner offers more. The all-new ArtiDiag500 not only includes full OBD2 functions and 4-system diagnostics but also provides DIYers with 6 maintenance services. The brand-new, cost effective AD500 is back in full swing!
- [4-System Diagnostics] DIY enthusiasts, take notice! Will these 4-system diagnostics be the treasure you've been seeking? The ArtiDiag500 code reader offers in-depth testing for the engine, transmission, ABS, and SRS systems, reading fault codes and data streams. It also visualizes real-time data in chart form, simplifying complex data for storage and future playback, aiding DIY users in problem detection.
- [6 Reset Functions] Hey, hang tight for a moment. With these 6 reset functions, the ArtiDiag500 has got you covered. It offers throttle adaptation along with reset capabilities for Oil, SAS, TPMS, BMS, and EPB. Seamlessly aligning the throttle, battery, tires, and brake pads with your vehicle, it also adjusts the steering angle and turns off the oil light. Looking to restore your car to its original condition? Look no further than the ArtiDiag500.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Global Support] Rest assured about compatibility with your vehicle and language – ArtiDiag500 currently supports 67+ car brands, 10,000+ models, covering most vehicles worldwide, and is available in 12 languages. Whether it's for your car or preferred language, there's an ideal choice for you. Plus, it's fully compatible with Android 11 for smoother use.
Toyota Sequoia 24">
- Bluetooth OBD2 Scanner for Diagnostics – The Innova 1000 connects to compatible devices via Bluetooth, allowing you to view data from engine, ABS, SRS, transmission, and more. For accurate readings and trouble code information, check compatibility with Innova’s Coverage Checker before purchase.
- Portable and User-Friendly Design – This car scanner is lightweight and easy to use, making it a practical portable scanner for home garages and roadside use. Suitable for both DIYers and professionals, it offers reliable performance for everyday diagnostics.
- Compatible with Most Vehicles (1996 & Newer) – Supports most cars, trucks, and SUVs from brands like Toyota, Ford, Honda, Chevrolet, Nissan, and more. Compatibility may vary by vehicle. Use Innova’s Coverage Checker to verify before purchase.
- No Subscriptions or Hidden Fees – Our wireless OBD2 scanner provides access to verified fixes and diagnostic solutions without subscription costs. Use America’s Top Car Repair App, RepairSolutions2, to receive repair guidance, part recommendations, and cost estimates with no additional charges. Join 2.6 million app users.
- Accurate Code Reading and Real-Time Data – This car diagnostic scanner delivers real-time data, including engine performance, ABS, SRS, and transmission codes. Ideal for checking engine light issues and preparing for emissions tests.
Last update on 2025-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
