“This site contains affiliate links for which OEMDTC may be compensated” |
IMPORTANT UPDATE
TECHNICAL INSTRUCTIONS
FOR
SAFETY RECALL 20TA03
INCOMPLETE OR NONDEPLOYMENT OF AIRBAGS AND/OR SEAT BELT PRETENSIONERS MAY OCCUR
CERTAIN
2014 – 2019 COROLLA
UPDATE 4/22/2020
Update 4/22/2020
- Added step to check and record DTC’s prior to work procedure.
Update 3/23/2020
- Added step to check and record DTC’s prior to work procedure.
The repair quality of covered vehicles is extremely important to Toyota. All dealership technicians performing this recall are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this recall repair are required to currently hold at least one of the following certification levels:
- Expert (Electrical or Hybrid)
- Master
- Master Diagnostic Technician
It is the dealership’s responsibility to select technicians with the above certification level or greater to perform this recall repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to perform this repair at all times.
IDENTIFICATION OF AFFECTED VEHICLES
COVERED VIN RANGE
NOTE:
- Check the TIS Vehicle Inquiry System to confirm the VIN is involved in this Safety Recall, and that the recall has not already been completed prior to dealer shipment or by another dealer.
- TMNA warranty will not reimburse dealers for repairs conducted on vehicles that are not affected or were completed by another dealer.
PREPARATION
PARTS
Part Number | Part Description | Quantity | ||||||||||||||||||||||||
04009-98112 | Airbag Harness Kit* | 1 | ||||||||||||||||||||||||
* The kit above includes the following parts:
**: You may not use all the cable ties depending on the vehicle/configuration |
TOOLS & EQUIPMENT
- Standard Hand Tools Work Gloves
- Techstream Molding Remover
C. MATERIALS
- Protective Tape Vinyl Tape
- Marker pen
WORK PROCEDURE TABLE OF CONTENTS
SAFETY PRECAUTIONS – SECTION V.
INSTALL AIRBAG SUB HARNESS – SECTION VI.
APPENDIX – SECTION VII.
SEOCONTENT-START
IMPORTANT UPDATE
TECHNICAL INSTRUCTIONS
FOR
SAFETY RECALL 20TA03
INCOMPLETE OR NONDEPLOYMENT OF AIRBAGS AND/OR SEAT BELT PRETENSIONERS MAY OCCUR
CERTAIN
2014 – 2019 COROLLA
UPDATE 4/22/2020
Update 4/22/2020
• Added step to check and record DTC’s prior to work procedure.
Update 3/23/2020
• Added step to check and record DTC’s prior to work procedure.
The repair quality of covered vehicles is extremely important to Toyota. All dealership technicians performing this recall are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this recall repair are required to currently hold at least one of the following certification levels:
• Expert (Electrical or Hybrid)
• Master
• Master Diagnostic Technician
It is the dealership’s responsibility to select technicians with the above certification level or greater to perform this recall repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to perform this repair at all times.
1
OPERATION FLOW CHART
The flow chart is for reference only. DO NOT use it in place of the full technical instructions. Follow ALL steps as outlined in the full technical instructions to confirm the campaign is completed correctly.
CoveredCampaign completed, return the vehicle to the customerVerify Vehicle Eligibility1. Confirm vehicle VIN matches the R.O.2. Check the TIS Vehicle Inquiry SystemNot CoveredNo further action requiredInstall the Airbag Sub HarnessComplete the Post Quality Repair check sheetPerform Health check and record any DTCs
2
IDENTIFICATION OF AFFECTED VEHICLES
A. COVERED VIN RANGE
NOTE:
• Check the TIS Vehicle Inquiry System to confirm the VIN is involved in this Safety Recall, and that the recall has not already been completed prior to dealer shipment or by another dealer.
• TMNA warranty will not reimburse dealers for repairs conducted on vehicles that are not affected or were completed by another dealer.
PREPARATION
A. PARTS
Part Number
Part Description
Quantity
04009-98112
Airbag Harness Kit*
1
* The kit above includes the following parts:
Part Number
Part Description
Quantity
82821-12C30
Urethane Sheet
1
89171-12020
Airbag Sub Harness
1
89279-12180
Water Guard Sheet
5.91in. (150mm) x 5.91in.(150mm)
1
89279-12190
Water Guard Sheet
4.72in. (120mm) x 5.91in. (150mm)
1
89279-12200
Water Guard Sheet
3.15in. (80mm) x 3.94in.(100mm)
1
89639-12020**
Cable Tie
7
90980-12878
Connector Holder
1
**: You may not use all the cable ties depending on the vehicle/configuration
B. TOOLS & EQUIPMENT
• Standard Hand Tools
• Techstream
• Work Gloves
• Molding Remover
C. MATERIALS
• Protective Tape
• Marker pen
• Vinyl Tape
WORK PROCEDURE TABLE OF CONTENTS
SAFETY PRECAUTIONS ················································································· SECTION V.
INSTALL AIRBAG SUB HARNESS····································································· SECTION VI.
APPENDIX ···································································································· SECTION VII.
SAFETY PRECAUTIONS
CRITICAL INFORMATION – READ THOROUGHLY
Always remember “SAFETY FIRST”.
1. TAKE PREVENTIVE MEASURES AGAINST INJURY
a) Wear gloves so as not to get injured by burrs etc. on the instrument panel reinforcement and the bracket.
3
INSTALL AIRBAG SUB HARNESS
COMPONENTS
4
1. PERFORM HEALTH CHECK
a. Using a Techstream, perform a Health Check and record any DTCs found.
Note: A Health check must be performed on every vehicle. Record any DTCs as they are used to confirm the vehicles final state after repair and aid in any additional dicussions needed with the customer
2. DISCONNECT THE NEGATIVE BATTERY CABLE
• Wait at least 90 seconds after disconnecting the cable from the negative battery terminal to prevent airbag and seat belt pretensioner deployment.
• Follow all precautions as outlined on TIS before servicing the SRS system.
5
3. DISCONNECT THE CONNECTOR OF THE AIRBAG SENSOR ASSEMBLY
a. Click the link below to access TIS for instructions
SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: REMOVAL; 2014 – 2019 MY Corolla (RM1000000009JTR)
NOTE:
• The following step DOES NOT need to be done although it is described in the repair manual.
– Center instrument cluster finish panel sub-assembly. (Only 17MY-19MY)
• It is not necessary to remove the airbag sensor assembly. (All Model Years)
It is not necessary to remove the center instrument cluster finish panel sub-assembly.
It is not necessary to remove the airbag sensor assembly
6
4. PREPARE AIRBAG SUB HARNESS
Click the play button to watch a video on how to prepare the airbag sub harness
NOTE: The video may take several minutes to load depending on internet connection.
IMPORTANT
The procedure shown in these technical instructions is for 2014 – 2019 COROLLA only. DO NOT use it for other vehicle models.
Install each water guard sheet properly
There are 3 different water guard sheets which will be used to protect the airbag sub harness. Each water guard sheet has double-sided tape on a side. If you install a sheet at a wrong position and seal with the tape, the sheet will no longer be reusable. Please make sure to follow the instructions on these Technical Instructions and install each sheet at correct positions.
Handling of airbag sub harness
• DO NOT twist the airbag sub harness forcibly as it may be damaged.
• DO NOT touch the terminals of the link connector. Also, make sure that no foreign matter enters the terminals of the link connector.
7
a) Before starting the procedure, place the airbag sub harness following the instructions below to ensure you are dealing with it at the proper orientation.
(1) Place the module and connector (30P) to the right side seen from you.
(2) Place the link connector to the left side seen from you.
b) Remove the plastic bag.
ENSURE the urethane sheet is flush with the connector in the next step.
c) Wrap the urethane sheet (7.87in. (200mm) x 1.97in. (50mm)) around the link connector.
8
d) Press the position shown in the illustration (concave part) with your finger to remove any gap.
e) Remove the release paper of the double-sided tape.
f) Place the smallest water guard sheet (3.15in. (80mm) x 3.94in. (100mm)) so that its double-sided tape side comes to the farther side from you, and then place the separating point of the airbag sub harness at the center of the sheet.
NOTE:
DO NOT place the water guard sheet in a wrong direction. Make sure that the double-sided tape side is on the farther side from you.
g) Wrap the water guard sheet from the side without double-sided tape, and then seal with double-sided tape for temporary fixing.
h) Double-check the airbag sub harness is placed correctly on the sheet.
i) Fix the both ends of the water guard sheet with vinyl tape.
NOTE:
Make sure that the water guard sheet is securely fixed.
9
j) Bend the harness and align the marking with the end face of the link connector.
NOTE: DO NOT twist harness forcibly.
k) Remove the release paper of the double-sided tape.
l) Place the biggest water guard sheet (5.91in. (150mm) x 5.91in. (150mm)) so that its double-sided tape side comes to the right side, and then place the link connector (Yellow color) as shown in the illustration.
NOTE:
Place the link connector so that its connecting part to instrument panel wire comes to the side with no double-sided tape of the water guard sheet.
m) Fold the water guard sheet so that its end is aligned with the end of the link connector.
n) Make sure that the both ends of the folded water guard sheet and the link connector are aligned, and then seal the water guard sheet with double-sided tape.
o) Double-check the marking is on the end face of the link connector.
p) Set a cable tie at center of the convex part of the link connector and fix the water guard sheet and link connector securely.
NOTE:
• A gap between the cable tie and the water guard sheet may cause the tie eventually be loosened and released. Make sure that the gap is reduced as much as possible.
10
• Make as little wrinkles as possible on the water guard sheet when installing it.
q) Cut off the excess of the cable tie.
r) Remove the release paper of the double-sided tape.
s) Place the water guard sheet (4.72in. (120mm) x 5.91in. (150mm)) so that its double-sided tape side comes to the farther side from you, and then place the module (Black color) as shown in the illustration.
t) Wrap the water guard sheet around so that it does not wrinkle.
u) Make sure that the water guard sheet is not wrinkled and seal the water guard sheet with double-sided tape.
11
v) Set a cable tie at center of the module and fix the water guard sheet and module securely.
NOTE:
• A gap between the cable tie and the water guard sheet may cause the tie eventually be loosened and released. Make sure that the gap is reduced as much as possible.
• Make as little wrinkles as possible on the water guard sheet when installing it.
w) Cut off the excess of the cable tie.
12
INTERMEDIATE INSPECTION (BY ANOTHER TECHNICIAN)
Confirm airbag sub harness is in proper condition
– Check the cable tie is fixed properly and if it is installed loose (big gap), tighten up the cable tie until fixed tightly (small gap).
– Confirm that the cable tie is installed at the center of the convex part of the link connector.
– Confirm that the cable tie is installed at the center of the module.
– Confirm that the water guard sheet is not flipped up.
13
5. INSTALL AIRBAG SUB HARNESS
Click the play button to watch a video on how to install the airbag sub harness
NOTE: The video may take several minutes to load depending on internet connection.
The procedure shown in these technical instructions is for 2014-2019MY COROLLA only. DO NOT use it for other vehicle models.
a) Using a screwdriver, disengage the 2 claws to release the retainer from the connector holder of the airbag sensor.
NOTE:
DO NOT remove the retainer from the connector holder completely. If removed, temporarily install it to the connector holder.
b) Using a screwdriver, disengage the claw and remove the connector (30P) from the connector holder.
14
c) Install the connector (30P) of the instrument panel wire to the provided connector holder and lock the retainer securely.
• Make sure that the connector (30P) is securely installed to the connector holder (provided).
• Securely lock the retainer.
• DO NOT lock the lever yet.
d) Flip up the water guard sheet of the link connector and connect the connector (30P) with connector holder (provided).
e) Lock the lever securely.
• DO NOT twist the airbag sub harness forcibly as it may be damaged.
• DO NOT touch the terminals of the link connector. Also, make sure that no foreign matter enters the terminals of the link connector.
• Securely lock the lever.
• Make sure that the water guard sheet is not flipped up and not pinched.
f) Lay out each part of the airbag sub harness as shown in the illustration.
NOTE:
Check the direction of the water guard sheet. The side which is not covered by the water guard sheet of the link connector and module must face downwards.
15
IMPORTANT
g) Pass the connector (30P) of airbag sub harness under the harness as shown in the illustration.
NOTE:
Make sure to pass the connector (30P) under the harness. Otherwise water may run along the harness of the connector (30P) and enter the ECU, resulting in damage of the ECU in the worst case. This may prevent the airbag from being deployed.
h) Connect the connector (30P) of airbag sub harness to the connector holder of the airbag sensor and lock the retainer securely.
Securely lock the retainer.
i) Connect the connector holder to the airbag sensor.
j) Lock the lever securely.
• Securely lock the lever.
• Make sure that the water guard sheet of the airbag sensor is not flipped up or caught.
16
Check each connector is securely connected.
(The retainers of connector holders are also securely installed)
k) Place the 2 cable ties at front side of the clamp.
NOTE:
If you place the cable ties at wrong positions, the link connector and module cannot be fixed securely in later steps.
17
WITH REAR AIR DUCT ONLY
l) With Rear Air Duct:
(1) Place the link connector on the instrument panel wire of the left side.
(2) Using the cable tie passed through under the instrument panel wire of the left side, fix the link connector at around the center of convex part of the link connector.
NOTE:
• Make sure that the link connector, water guard sheet and instrument panel wire are securely fixed.
• Make sure that the water guard sheet is not flipped up.
18
WITH REAR AIR DUCT ONLY
(3) Link 2 cable ties in order to fix the link connector to the rear air duct LH.
(4) Pass the linked cable tie through the positions shown below and temporarily install it.
– Outside the rear air duct LH and the water guard sheet of the link connector
– Between the instrument panel brace and rear air duct LH
Be careful not to include the uncovered part of the instrument panel wire on the vehicle left side when fixing the cable tie.
(5) Fix the link connector with the cable tie as shown in the illustration.
NOTE:
• Make sure that the link connector, water guard sheet and instrument panel wire are securely fixed.
• Make sure that the water guard sheet is not flipped up.
(6) Cut off the excess of the cable tie.
19
WITH REAR AIR DUCT ONLY
(7) Bend the module side of the airbag sub harness as shown in the illustration.
(8) Place the module on the instrument panel wire of the right side.
(9) Using the cable tie passed through under the instrument panel wire of the right side, fix the module at around its center.
NOTE:
• Make sure that the module, water guard sheet and instrument panel wire are securely fixed.
• Make sure that the water guard sheet is not flipped up.
20
WITHOUT REAR AIR DUCT ONLY
l) Without Rear Air Duct:
(1) Place the link connector outside the instrument panel wire of the left side.
(2) Using the cable tie passed through under the instrument panel wire of the left side, fix the link connector at around the center of convex part of the link connector.
NOTE:
• Make sure that the link connector, water guard sheet and instrument panel wire are securely fixed.
• Make sure that the water guard sheet is not flipped up.
(3) Bend the module side of the airbag sub harness as shown in the illustration.
(4) Place the module outside the instrument panel wire of the right side.
(5) Using the cable tie passed through under the instrument panel wire of the right side, fix the module at around its center.
NOTE:
• Make sure that the module, water guard sheet and instrument panel wire are securely fixed.
• Make sure that the water guard sheet is not flipped up.
21
ALL VEHICLE TYPES
*This illustration uses “w/ Rear Air Duct” for reference
m) Using a cable tie, fix the excess harness of module side together with the instrument panel wire.
DO NOT tie up the cable tie excessively to avoid damage to the harness.
*This illustration uses “w/ Rear Air Duct” for reference
n) Place the water guard sheet of the airbag ECU under the harness between the link connector and module.
o) Make sure there is no interference with the shift cable.
22
INTERMEDIATE INSPECTION (BY ANOTHER WORKER)
Confirm airbag sub harness is installed in proper condition
– Check each water guard sheet is not flipped up.
– Check each cable tie is fixed at its proper position and is securely fixed.
– Check the cable tie is fixed properly and if it is installed loose, tighten up the cable tie. And then cut off the excess of the cable tie.
With Rear Air Duct:
Without Rear Air Duct:
23
6. Post Repair Quality Checksheet
a. Login to the website below to complete the Post Repair Quality Checksheet
URL: https://toyota-trw.imagespm.info/
Login Cridentials
Username: Dealer code
Password (1st time login): XXXXX
If you have any issues with the website contact Quality_Compliance@toyota.com for assistance.
b. Enter the following information into the site
Technician Name
Spin ID
Select your current Toyota certification
c. Enter the VIN into the website
d. Upload a picture of the completed wire harness installation as instructed on the website.
NOTE: Example photo below shows vehicle with rear air ducts. Vehicles without rear air ducts will look slightly different.
The picture you take MUST MATCH the angle of image shown below
Example picture
e. Record the warranty authorization number and provide it to the warranty administrator for claim filing.
24
7. RESTORE THE VEHICLE
a. Click the link below to access TIS for instructions
SUPPLEMENTAL RESTRAINT SYSTEMS: CENTER AIRBAG SENSOR ASSEMBLY: INSTALLATION; 2014 – 2019 MY Corolla (Doc ID: RM1000000009JTP)
–
Be careful not to pinch the airbag sub harness when installing the console box.
8. INSPECT SRS WARNING LIGHT
a) Check that the airbag warning light lights when the power switch is turned on.
b) Check that the airbag warning light goes off approximately 6 seconds after turning on of the ignition switch.
NOTE:
If the airbag warning light remains on, it is likely to be caused by connection failure of the airbag connector.
◄ VERIFY REPAIR QUALITY ►
– Confirm there is no SRS light on
– Confirm center console has been properly installed and that no large gaps in trim are present
– Confirm you have completed the Repair Quality Checksheet and that the image you uploaded was correct.
If you have any questions regarding this Safety Recall, please contact your regional representative.
APPENDIX
A. CAMPAIGN DESIGNATION DECODER
1919 = 201920 = 202021 = 202122 = 202223 = 2023Etc…Year Campaignis Launched19TA01TT = ToyotaL = LexusVehicle MakeAA = Safety Recall RemedyB = Safety Recall InterimC = Special Service CampaignD = Limited Service CampaignE = Customer Support ProgramF = Emissions Recall(May use other characters in unique cases)Field Action Category and Phase0101 = 1st Field Action of the year02 = 2nd Field Action of the year03 = 3rd Field Action of the year(The sequence is unique for each Field Action category)(May use other characters in unique cases)Field Action Sequence
Examples:
19TA01 = Launched in 2019, Toyota, Safety Recall Remedy Phase, 1st Safety Recall Launched in 2019
20TC02 = Launched in 2020, Special Service Campaign, 2nd Special Service Campaign Launched in 2020
21TE05 = Launched in 2021, Customer Support Program, 5th Customer Support Program Launched in 2021
SEOCONTENT-END
Remedy Instructions and TSB
RCRIT-20V024-8731.pdf 5437.111KB
Remedy Instructions and TSB
RCRIT-20V024-1915.pdf 5438.128KB
Remedy Instructions and TSB
RCRIT-20V024-1548.pdf 5424.834KB
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 👍【Professional 4 Systems Diagnostics】For DIYers addressing typical concerns like engine, transmission, ABS, and SRS, the TOPDON AD500 vehicle scanner provides specialized diagnostic solutions. It effortlessly interprets and eliminates fault codes and scrutinizes data streams, ensuring the prompt detection of issues.
- 👍【6 Reset Functions】The AD500 car diagnostic tool offers essential features like Oil Reset, Throttle Adaptation, SAS/TPMS/BMS/EPB Reset. Easily reset oil change indicators, fine-tune throttle response, and recalibrate steering angle sensors for optimal vehicle performance and maintenance convenience.
- 👍【Works Easier with AD500】The AD500 scanner combines a 5” touchscreen with buttons for easier and seamless operation. Elevate your diagnostic experience with DTC Lookup, Diagnostic data record, and printing diagnostic reports via email. Stay up to date with lifetime free upgrades via Wi-Fi, ensuring your tool is always equipped with the latest features.
- 👍【Fast Diagnostics, Instant Support】With AutoVIN, instantly obtain crucial vehicle details for expedited diagnostic processes. The AD500 code reader not only facilitates data stream recording for later review but also acts as a battery voltage monitor, providing valuable insights into your vehicle's battery health. If you encounter any diagnostic hurdles, share feedback with TOPDON for prompt professional support.
- 👍【Upgraded ArtiDiag500 for Peak Performance】Experience enhanced performance with the upgraded AD500 diagnostic tool, boasting a 4-core 1.5GHz CPU, 2GB RAM + 32GB ROM, and seamless operation with Android 11.0. Enjoy extended battery life with its 3350mAh capacity. Plus, benefit from TOPDON's 1-year quality backup for added peace of mind.
- 🔥【Easy to use and friendly】+【Faster diagnostic speed】 FOXWELL NT604 is the 2024 newest enhanced 4 system code reader, which is capable of reading/clearing fault codes, retrieving vehicle information and displaying 4-in-1 live data stream. You will easily find what's wrong with your car to avoid expensive trip to dealership. At the same time, this car scanner will directly tell you what the corresponding code means, avoiding the hassle of searching for information.
- 🛠【OBD2 Full Function】+【Check Engine/ABS/SRS/Transmission】 This scan tool will allow you to perform full OBDII diagnostic for all cars with OBDII protocols. You can use it to check if your car is ready for annual testing through the I/M Readiness menu. In addition, the device also has value-added functions such as real-time data flow, DTC Lookup, data playback, and printing. Turn off Check Engine/ABS/SRS/Transmission Light. Tips: the fault code can be only erased after the problem is fixed.
- 🚗【Cover 10000+ models &60+ Car Makes】 and 【AUTOVIN】 Compared with Other scanner which only supports 40 car makes, NT604 car diagnostic scanner for all cars contains more than 60 car brands and 10000+ cars for almost all OBDII cars sold worldwide like passenger car, SUVs, minivans, light-duty trucks, etc. produced by Asian, European, American with the supported year differing from 1996 to 2024. It allows you to get your VIN and vehicle info rapidly, no need to take time input one by one.
- 🛒【Battery Voltage Checker】+【Lifetime Free Update, No Subscription fee 】 It monitors the real-time voltage of the vehicle battery and displays it in graphical and textual form, informing you of the health status of the battery. Also monitor the health of your car. NT604 is equipped with the latest software directly, so you don't need to download a bunch of updated software after unboxing to use it. Lifetime no subscription fee for upgrading software.
- 🎁【Great festival Idea:Applicable for Many People】+【High End and Exquisite Protective Packaging】 Best one item for Dad, Husband, Boyfriend, Handy Men. Every car owner will need a 4 systems diagnostic scan tool! This code reader fits for home mechanic, DIY car owners, advanced hobbyiest, car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, individual. Apparently, this is the most economical scan tool for every mechanic.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only., but not for Mac and ios system.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- ABS/SRS OBD2 Scanner > Enjoy this ABS OBD2 code reader to reveal exact issues underlying in your brake, airbag, and engine systems, test individual ABS/SRS sensors, valves, or solenoids to quickly locate malfunctions (compatible with GM, Nissan, Fiat, Benz, Volvo, Land Rover, BMW, USA Ford, please reach us for details.), making sure critical safety systems work in perfect harmony together against accidents to be safe than sorry. NOTE: Only support upgrade on windows.
- 3 Most Needed Service Functions > This OBD2 scanner guides you through step by step procedures to reset oil service light and programmed mileage intervals for engine efficiency (Oil Reset); to calibrate steering wheel position for vehicle’s traveling in a straight line (SAS Reset); to clear the original low battery fault information against coming battery failures or damage (BMS Reset); saving your needless visits to mechanics. NOTE: Not suitable for all models, please reach us for compatibility.
- Full OBD2 Diagnostics > Say goodbye to the hassle of manual check-ups via this srs code reader. Quickly correct Check Engine Light warning on most OBD2/CAN compatible vehicles. Easily access to your smog status with one simple click I/M Readiness; and being filled with features for live data readings, freeze frame data, plus EVAP system, onboard monitor test means this scan tool checks all daily car care boxes.
- Work Easier > Red-Yellow-Green LEDs in this OBD2 scanner quickly show the overall DTC status without toggling through menu selections. HELP hotkey takes you directly to detailed descriptions/tips. Read/Erase DTC, I/M readiness shortcuts are added for optimized operation, along with DTC Lookup library for interpreting codes, designing the SRS OBD2 code reader a pleasure to use right out of the package even for beginners.
- Helpful Service > Get instant, free lifetime access to the most recent updates to add new car models and troubleshooting bugs making the OBD2 scanner a long-term investment for any home mechanics. The extended 1 years of quality assurance sweetens the worry-free deal even further. Multilingual Menu: EN, FR, ES, DE, IT, RU, PT, and JP. NOTE: Only support upgrade on windows.
- The VD500 OBD2 scanner is specifically designed to diagnose Volkswagen Group (Fits for VW/Audi/Skoda/ SEAT) 12-volt 16-pin vehicles, but can also be used with other 12-volt (non-Volkswagen) and light trucks (non-electric) vehicles manufactured in 1996 or later that are OBD II -compliant with standard 16-pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN).
- For Volkswagen (VAG) vehicles diagnostics, the device can not only read and clear codes on engine, ABS, transmission, SAS (not all cars), ESP, TPMS and other systems, but also reset the oil, brake pad and throttle position adaption.
- For other OBD II vehicles (non-Volkswagen), the VD500 can read and clear fault codes, display fault code definitions, turn off the CEL (check engine light) and retrieve VIN information ONLY.
- The VD500 diagnostic offering for Volkswagen vehicles covers the following vehicles: fits for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); fits for Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); fits for Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); fits for SEAT (Leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra) Diagnostics.
- With English and German as display languages, this diagnostic tool provides life-time free software updates to fix the latest bugs or add new parameters. Simply download the software from the official website, then follow on-screen instructions to install it.
Last update on 2024-04-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.