2007

ABS Light and/or Cruise Light Flashing and A/C Inoperative – 2005-2007 Toyota Corolla & Matrix

by

T-SB-0019-08 March 19, 2008   ABS Light and/or Cruise Light Flashing and A/C Inoperative   Service Category Brake   Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2005 – 2007 Corolla, Matrix Drive Type(s): 2WD Engine(s): 1ZZ   Introduction Some 2005 – 2007 model year Corolla and Matrix vehicles equipped with a 1ZZ-FE engine may exhibit one or more of … Read more

Frequent Upshifting and Downshifting with Cruise Control “ON” – 2006-2008 Toyota RAV4

by

T-SB-0015-08 February 13, 2008   Frequent Upshifting and Downshifting with Cruise Control “ON”   Service Category Engine/Hybrid System   Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2006 – 2008 RAV4 Drive Type(s): 4WD, 2WD Engine(s): 2AZ Transmission(s): 4AT VDS(s): BD31V, BD32V, BD33V, ZD31V, ZD32V, ZD33V WMI(s): JTM   Introduction Some 2006 – 2008 model year RAV4 vehicles equipped … Read more

M.I.L. ON” VVTi DTCs OIL CONTROL VALVE (OCV) – 2006-2008 Toyota RAV4

by

EG004-08   M.I.L. ON” VVTi DTCs OIL CONTROL VALVE (OCV)   Models: ’06 – ’08 RAV4 (2GR–FE)   Introduction Some 2006 – 2008 model year RAV4 vehicles may exhibit a M.I.L. “ON” condition with one or more VVTi related Diagnostic Trouble Codes (DTCs) stored in the Engine Control Module or ECM (SAE term: Powertrain Control Module/PCM). Please use … Read more

Brake Actuator Noise – 2004-2007 Toyota Prius

by

T-SB-0307-08   Brake Actuator Noise   Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2004 – 2007 Prius   Introduction Some 2004 – 2007 model year Prius vehicles may exhibit a squeak-type noise when pressing or releasing the brake pedal. This noise may only be audible when the vehicle is in “READY” mode and the vehicle is not moving. Brake … Read more

Oil Leak from Front Timing Cover – 2003-2007 Toyota 4Runner

by

EG049-07   OIL LEAK FROM FRONT TIMING COVER   Introduction Some 2003 – 2007 model year 4Runner vehicles with 1GR–FE engines may display evidence of a small oil leak located where the Bank 1 cylinder head, engine block, and timing cover meet. Use the following repair procedure to address this condition.   Production Change Information MODEL PLANT DRIVETRAIN PRODUCTION … Read more