| “This site contains affiliate links for which OEMDTC may be compensated” |
January 31, 2018
Sensor Failures May Prevent Air Bag Deployment
If the air bags fail to deploy in a crash, it can increase the risk of injury.
NHTSA Campaign Number: 18V085
Manufacturer Toyota Motor Engineering & Manufacturing
Components AIR BAGS
Potential Number of Units Affected 48,672
Summary
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2016 Toyota Prius and Lexus RX 350, RX 350 F Sport, RX 450h F Sport and RX 450h vehicles and 2015-2016 Lexus NX 200T, NX Turbo and NX 300h vehicles. The air bag pressure sensors and/or the acceleration sensors may fail causing the side/curtain shield air bags and/or the front air bags to not deploy in the event of a crash.
Remedy
Toyota will notify owners, and dealers will replace the sensors as necessary based on their serial numbers, free of charge. The recall is expected to begin March 12, 2018. Owners may contact Toyota customer service at 1-800-331-4331. Toyota’s numbers for this recall are JLA, J0F.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
◄ IMPORTANT UPDATE ►
Lexus Fixed Operations
The attached Dealer Letter has been updated. Refer to the details below.
| DATE | TOPIC |
|---|---|
| May 3, 2018 | The RX op codes “Flat Rate Time (hours/vehicle)” in the “Warranty Reimbursement Procedure” section have been updated with an additional 0.2 hours. |
| April 26, 2018 | Information on Phase 2 RX vehicles remedy updated. Updates include:
|
The most recent update in the attached Dealer Letter will be highlighted with a red box.
Please review this notification with your staff to assure that all relevant personnel have been briefed regarding this subject.
Originally Published: March 29, 2018
| Subject: | Safety Recall JLA (Interim J2A) – Phase 2 Remedy Notice Certain 2015 – 2016 Model Year NX Vehicles and Certain 2016 Model Year RX Vehicles Airbag Sensor |
On January 31, 2018, Lexus filed a Defect Information Report (DIR) with the National Highway Traffic Safety Administration (NHTSA) informing the agency of our intent to conduct a voluntary Safety Recall on certain 2016 model year RX and certain 2015 – 2016 model year NX vehicles.
Condition
The involved vehicles have airbag systems where an open circuit could be created over time. If this were to occur, the airbag warning light will illuminate, and the side/curtain shield airbags, and/or front airbags, may not deploy. Airbag non-deployment could increase the risk of injury to the occupants in the event of a crash.
Remedy
Lexus is implementing the second phase of the remedy.
Phase 1 Vehicles – Remedy
Phase 1 covers NX vehicles. Lexus will send an owner notification by first class mail advising owners to make an appointment with their authorized Lexus dealer to have the airbag sensors inspected and replaced with new ones, IF NECESSARY, at NO CHARGE.
Phase 2 Vehicles – Remedy
Phase 2 covers RX vehicles. Lexus sent an interim owner notification by first class mail advising owners of the condition. The remedy is now available, and Lexus will send an owner notification by first class mail advising owners to make an appointment with their authorized Lexus dealer to have the airbag sensors inspected and replaced with new ones, IF NECESSARY, at NO CHARGE.
Covered Vehicles
There are approximately 40,700 vehicles covered by this Safety Recall. There are approximately 300 vehicles distributed to Puerto Rico involved in this Safety Recall.
Phase 1
| Model Name | Model Year | Production Period | Approximate UIO |
|---|---|---|---|
| NX 200t | 2015 -2016 | Late May 2015 – mid-October 2015 | 17,900 |
| NX 300h | 2015 – 2016 | Late May 2015 – mid-October 2015 | 1,500 |
Phase 2
| Model Name | Model Year | Production Period | Approximate UIO |
|---|---|---|---|
| RX 350 | 2016 | Early May 2015 – mid-January 2016 | 18,600 |
| RX 450h | 2016 | Late September 2015 – mid-January 2016 | 2,700 |
Owner Letter Mailing Date
Lexus notified owners of phase 1 vehicles in late March, advising them that the remedy is available. Lexus also mailed an interim owner letter to owners with vehicles involved in phase 2 in late March. Lexus will notify owners of phase 2 vehicles in early May, advising them that the remedy is available. A sample of the owner letters have been included for your reference.
Lexus makes significant effort to obtain current customer name and address information from each state through industry resources when mailing owner letters. In the event your dealership receives a notice for a vehicle that was sold prior to the Safety Recall announcement, it is the dealership’s responsibility to forward the owner letter to the customer who purchased the vehicle.
Please note that only owners of the covered vehicles will be notified. If you are contacted by an owner who has not yet received a notification, please verify eligibility by confirming through TIS prior to performing repairs. Dealers should perform the repair as outlined in the Technical Instructions found on TIS.
New Vehicles in Dealership Inventory
There was 1 vehicle in new dealer inventory as of January 30, 2018.
| Under Title 49, Section 30112 of the United States Code, a dealer cannot sell, offer for sale, or introduce or deliver for introduction in interstate commerce a new motor vehicle when it is aware that the vehicle does not comply with an applicable Federal Motor Vehicle Safety Standard or contains a defect related to motor vehicle safety. Further, 49 Code of Federal Regulations §577.13 requires us to provide the following advisory: It is a violation of Federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.
Lexus reimburses dealers for flooring costs associated with new vehicles held in dealership inventory until the recall remedy becomes available. Lexus provides these flooring reimbursements at 60 day intervals. Lexus reserves the right to withhold or charge-back any flooring reimbursement funds that may have been paid to the dealer if it determines that a new vehicle subject to a safety recall was sold without first being remedied. Vehicle Safety Recall completion should always be verified through TIS. We request your assistance to ensure involved vehicles are identified and not delivered prior to performing the remedy. |
NOTE: Dealers can identify if any of their new and used inventory has any open campaigns in the Vehicle Inventory Summary available in Dealer Daily (https://dealerdaily.Lexus.com/). The Vehicle Inventory Summary may take up to 24 hours to populate information for newly launched campaigns.
Pre-Owned Vehicles in Dealer Inventory
To ensure customer satisfaction, Lexus requests that dealers complete this Safety Recall on any used vehicles currently in dealer inventory that are covered by this Safety Recall prior to customer delivery. However, if the campaign cannot be completed (for example, due to remedy parts availability), delivery of a covered vehicle is acceptable if disclosed to the customer that the vehicle is involved in a Safety Recall.
Lexus expects dealers to use the attached Customer Contact and Vehicle Disclosure Form to obtain vehicle buyer information. Dealers are expected to provide a copy of the completed form, along with the most current FAQ, to the vehicle buyer. Lexus and the dealer may use this information to contact the customer when the remedy becomes available.
Keep the completed form on file at the dealership and send a copy to quality_compliance@Lexus.com. In the subject line of the email, state “Disclosure Form JLA” and include the VIN.
NOTE: Dealers can identify if any of their new and used inventory has any open campaigns in the Vehicle Inventory Summary available in Dealer Daily (https://dealerdaily.Lexus.com/). The Vehicle Inventory Summary may take up to 24 hours to populate information for newly launched campaigns.
L/Certified Vehicles
The policy prohibits the certification of any vehicle with an outstanding Safety Recall, Special Service Campaign, or Limited Service Campaign. Thus, no affected units are to be designated, sold, or delivered as an L/Certified vehicle until all applicable Safety Recalls, Special Service Campaigns, and Limited Service Campaigns have been completed on that vehicle.
LCCS Service Loaner Vehicles
Lexus requests that dealers remove all LCCS service loaner vehicles from service that are covered by a Safety Recall unless the defect has been remedied.
Loaner Vehicle Reimbursement Procedure
For customers who request loaner vehicle or alternative transportation in the interim phase, a loaner vehicle or alternative transportation can be claimed up to $45 per day.
| Op. Code | Description |
|---|---|
| LGG28A | Vehicle Rental 1-30 Days |
| LGG28B | Vehicle Rental 31-45 Days |
NOTE: Rental invoice MUST be attached to all rental claims. These claims may be subject to debit if rental invoice is not attached.
Technician Training Requirements
The repair quality of covered vehicles is extremely important to Lexus. All dealership technicians performing this repair are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this repair are required to currently hold at least one of the following certification levels:
- Certified (with L652 course completed)
- Senior (with L652 course completed)
- Master
Always check which technicians can perform the repair by logging on to https://LCTPReports.com . It is the dealership’s responsibility to select technicians with the above certification level or greater to perform this repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to perform this repair at all times.
Remedy Procedures
Refer to TIS for Technical Instructions on repair. Conduct all non-completed Safety Recalls and Service Campaigns on the vehicle during the time of appointment.
Repair Quality Confirmation
The repair quality of covered vehicles is extremely important to Lexus. To help ensure that all vehicles have the repair performed correctly, please designate at least one associate (someone other than the individual who performed the repair) to verify the repair quality of every vehicle prior to customer delivery.
Parts Ordering Process
Due to potentially limited availability, the parts may have been placed on either Manual Allocation Control (MAC) or Dealer Ordering Solutions (DOS). As the parts inventory changes, the ordering process may change. Please check the Lexus Special Activities MAC/DOS report on Dealer Daily for the most up-to-date parts ordering information.
| Part Number | Description | Quantity |
|---|---|---|
| 04007-2A347 | SENSOR, PRESSURE SIDE AIR BAG | 2 |
| 74231-0E090 | Panel, FR DOOR ARMREST BASE, UPR RH | 1 |
The parts listed above are required by all vehicles involved in phase 2 (RX vehicles).
NOTE:
- Inspection software will provide part number information if it is determined that additional part replacement is required.
- An airbag sensor will not be released without a screenshot submitted of the judgement screen from the inspection software. Refer to the MAC report for additional details.
Warranty Reimbursement Procedure
Phase 1 Vehicles (NX):
Phase 2 Vehicles (RX) – Inspection Needed:
Phase 2 Vehicles (RX) – No Inspection Needed:
NOTE: Using the tables below determine which remedy op code was required based on the inspection software results.
| Operation | |||||||||
| 1 | Inspect the airbag sensors | ||||||||
| 2 | Replace the front airbag sensor one side | ||||||||
| 3 | Replace the front airbag sensor both sides | ||||||||
| 4 | Replace the front door airbag sensor one side | ||||||||
| 5 | Replace the front door airbag sensor both sides | ||||||||
| 6 | Replace the quarter panel airbag sensor one side | ||||||||
| 7 | Replace the quarter panel airbag sensor both sides | ||||||||
| Applicable Model | Operation | Flat Rate Time (hours/vehicle) | Op Code | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | |||
| NX | ● | 0.3 | JLA001 | ||||||
| NX | ● | ● | 1.3 | JLA002 | |||||
| NX | ● | ● | ● | 1.9 | JLA003 | ||||
| NX | ● | ● | ● | 2.4 | JLA004 | ||||
| NX | ● | ● | ● | 1.7 | JLA005 | ||||
| NX | ● | ● | ● | 2 | JLA006 | ||||
| NX | ● | ● | ● | ● | 2.3 | JLA007 | |||
| NX | ● | ● | ● | ● | 3.1 | JLA008 | |||
| NX | ● | ● | ● | ● | 2.6 | JLA009 | |||
| NX | ● | ● | ● | ● | 2.8 | JLA010 | |||
| NX | ● | ● | 1.7 | JLA011 | |||||
| NX | ● | ● | ● | 2.3 | JLA012 | ||||
| NX | ● | ● | ● | 2.8 | JLA013 | ||||
| NX | ● | ● | ● | 2.1 | JLA014 | ||||
| NX | ● | ● | ● | 2.4 | JLA015 | ||||
| NX | ● | ● | ● | ● | 2.7 | JLA016 | |||
| NX | ● | ● | ● | ● | 3.5 | JLA017 | |||
| NX | ● | ● | ● | ● | 3 | JLA018 | |||
| NX | ● | ● | ● | 2.3 | JLA019 | ||||
| NX | ● | ● | 1.4 | JLA020 | |||||
| NX | ● | ● | ● | 1.8 | JLA021 | ||||
| NX | ● | ● | ● | 2.1 | JLA022 | ||||
| NX | ● | ● | 1.9 | JLA023 | |||||
| NX | ● | ● | ● | 2.6 | JLA024 | ||||
| NX | ● | ● | 1.2 | JLA025 | |||||
| NX | ● | ● | 1.5 | JLA026 | |||||
| NX | ● | ● | ● | ● | 3.2 | JLA027 | |||
| RX | ● | ● | ● | 2.5 | JLA029 | ||||
| RX | ● | ● | ● | ● | 3.2 | JLA030 | |||
| RX | ● | ● | ● | ● | 2.9 | JLA031 | |||
| RX | ● | ● | ● | 2.8 | JLA032 | ||||
| RX | ● | ● | ● | ● | 3.5 | JLA033 | |||
| RX | ● | ● | ● | ● | 3.2 | JLA034 | |||
| RX | ● | ● | ● | 2.5 | JLA035 | ||||
| RX | ● | ● | 2.1 | JLA036* | |||||
| RX | ● | ● | ● | 2.8 | JLA037 | ||||
| RX | ● | 1.9 | JLALGW
** |
||||||
- Remedy phase 2 warranty claim filing will be available within two weeks of remedy launch.
- * JLA036 should only be claimed for phase 2 vehicles that require inspection, and the front door airbag sensor both sides are the only sensors replaced.
- **JLALGW should be claimed for all phase 2 vehicles that require replacement of the front door airbag sensorboth sides, but no inspection is required.
- Technical instructions can be used to determine whether inspection is necessary.
- The flat rate times include 0.1 hours for administrative cost per unit for the dealership.
- Rental can be claimed as a sublet under the remedy op code for a maximum of 7 days at $45 dollars per day in the event that the part is not available due to a back order situation.
- Towing can be claimed under any of the remedy opcodes for a maximum of $250 as sublet type “TW” in the event the customer requests vehicle pickup.
Lexus’ usual customer care amenities of car wash and fuel fill-up apply to this Safety Recall. Additionally, three days of rental vehicle expense (to a maximum of $45) while the vehicle is being remedied or the cost of pick-up and delivery of the customer’s car may be claimed if required and subject to the guidelines published in the Safety Recall and Special Service Campaign General Procedures document on TIS.
NOTE: Rental invoice MUST be attached to ALL rental claims. These claims may be subject to debit if rental invoice is not attached.
Claim Filing Accuracy and Correction Requests
It is the dealer’s responsibility to file claims correctly for this Safety Recall. This claim filing information is used by Lexus for various government reporting activities; therefore, claim filing accuracy is crucial. If it has been identified that a claim has been filed using an incorrect opcode or a claim has been filed for an incorrect VIN, refer to Warranty Procedure Bulletin PRO17-03 to correct the claim.
Media Contacts
It is imperative that all media contacts (local and national) receive a consistent message. In this regard, all media contacts must be directed to Victor Vanov (469) 292-1318 in Lexus Corporate Communications. Please do not provide this number to customers. Please provide this contact only to media.
Customer Reimbursement
Reimbursement consideration instructions will be included in the owner letter.
Customer Contacts
Customers who receive the owner letter may contact your dealership with questions regarding the letter and/or the Safety Recall. Please welcome them to your dealership and answer any questions that they may have. A Q&A is provided to assure a consistent message is communicated.
Customers with additional questions or concerns are asked to please contact the Lexus Guest Experience Center (1-800-255-3987) – Monday through Friday, 7:00 am to 7:00 pm, Saturday 7:00 am to 5:00 pm Central Time.
Campaign Designation Decoder
 |
| Examples:
C2B = Launched in 2012, Interim Phase, 2nd Campaign Launched in 2012 |
Please review this entire package with your Service and Parts staff to familiarize them with the proper step-by-step procedures required to implement this Safety Recall.
Thank you for your cooperation.
Lexus
A Division of Toyota Motor Sales, USA
Attachments
CC: Customer Satisfaction Manager
Dealer Principal
General Manager
Parts Manager
Pre-owned Manager
Sales Manager
Service Manager
Warranty Administrator
Safety Recall JLA – Remedy Notice
Certain 2015 – 2016 NX Vehicles and Certain 2016 Model Year RX Vehicles
Airbag Sensor
Frequently Asked Questions
Original Publication Date: March 29, 2018
| ◄ IMPORTANT UPDATE ► |
| DATE | TOPIC |
|---|---|
| 04/26/2018 | Phase 2 remedy launch. |
The most recent update will be highlighted with a red box.
| Q1: | What is the condition? | ||||||||||||||||||||||||
| A1: | The involved vehicles have airbag systems where an open circuit could be created over time. If this were to occur, the airbag warning light will illuminate, and the side/curtain shield airbags, and/or front airbags may not deploy. Airbag non-deployment could increase the risk of injury to the occupants in the event of a crash.
Q1a: Will all airbags in the subject vehicles become deactivated if an affected sensor is equipped in my vehicle? A1a: Depending on the location, and type of the affected sensor with the condition, the side/curtain airbags and/or front airbags may not deploy. |
||||||||||||||||||||||||
| Q2: | Are there any warning signs that this condition exists? | ||||||||||||||||||||||||
| A2: | If this were to occur, the airbag warning light will illuminate.
Airbag Warning Light |
||||||||||||||||||||||||
| Q3: | What should I do if my airbag warning light illuminates? | ||||||||||||||||||||||||
| A3: | The Airbag Warning Light is designed to come on when the engine switch is turned to the “ON” position during the ignition cycle check function. Under normal operation it goes off after a few seconds. The warning light turning off after the check period means the system is operating as designed**. If the Airbag Warning Light (1) does not illuminate or (2) illuminates or remains illuminated after the few second check period, your front or side/curtain airbags may not operate in a crash. Please contact your local authorized Lexus dealer promptly for diagnosis and appropriate repair. If the warning lamp illumination is related to the condition covered by this Safety Recall, the inspection and potential repair will be performed at no charge to you.
**Please refer to the Owner’s Manual for additional operation details related to this system. |
||||||||||||||||||||||||
| Q4: | What is Lexus going to do? | ||||||||||||||||||||||||
| A4:
|
Lexus is implementing the second phase of the remedy.
Phase 1 Vehicles – Remedy Phase 1 covers NX vehicles. Lexus will send an owner notification by first class mail in late March, advising owners to make an appointment with their authorized Lexus dealer to have the airbag sensors inspected and replaced with new ones, IF NECESSARY, at NO CHARGE.
Phase 2 Vehicles – Remedy Phase 2 covers RX vehicles. Lexus sent an interim owner notification by first class mail advising owners of the condition. The remedy is now available, and Lexus will send an owner notification by first class mail advising owners to make an appointment with their authorized Lexus dealer to have the airbag sensors inspected and replaced with new ones, IF NECESSARY, at NO CHARGE.
|
||||||||||||||||||||||||
| Q5: | Which and how many vehicles are covered by this Safety Recall? | ||||||||||||||||||||||||
| A5: | There are approximately 40,700 vehicles covered by this Safety Recall. There are approximately 300 vehicles distributed to Puerto Rico involved in this Safety Recall.
Phase 1
Phase 2
Q5a: Are there any other Toyota/Lexus/Scion vehicles covered by this Safety Recall in the U.S.? A5a: Yes, there are certain 2016 model year Toyota Prius vehicles covered by this Safety Recall. |
||||||||||||||||||||||||
| Q6: | Is the remedy currently available for Phase 1 and Phase 2 vehicles? | ||||||||||||||||||||||||
| A6: | The remedy is currently available for all Phase 1 and Phase 2 vehicles. | ||||||||||||||||||||||||
| Q7: | How long will the repair take? | ||||||||||||||||||||||||
| A7: | Including wait time and depending on the dealership’s schedule, the inspection will take approximately 1 hour. If the results of the inspection determine that sensor replacement is necessary, the time necessary will range from approximately 1.5 hours to approximately 4.0 hours, depending upon how many sensors require replacement. | ||||||||||||||||||||||||
| Q8: | What if I previously paid for repairs related to this Safety Recall? | ||||||||||||||||||||||||
| A8: | Reimbursement consideration instructions will be provided in the owner letter. | ||||||||||||||||||||||||
| Q9: | How does Lexus obtain my mailing information? | ||||||||||||||||||||||||
| A9: | Lexus uses an industry provider who works with each state’s Department of Motor Vehicles (DMV) to receive registration or title information, based upon the DMV records. Please make sure your registration or title information is correct. | ||||||||||||||||||||||||
| Q10: | What if I have additional questions or concerns? | ||||||||||||||||||||||||
| A10: | If you have additional questions or concerns, please contact the Lexus Guest Experience Center at 1-800-255-3987, Monday through Friday, 7:00 am to 7:00 pm, Saturday 7:00 am to 5:00 pm Central Time. |
5 Affected Prodcts
Vehicles
| MAKE | MODEL | YEAR |
| LEXUS | NX | 2015-2016 |
| LEXUS | RX350 | 2016 |
| LEXUS | RX450H | 2016 |
| TOYOTA | PRIUS | 2016 |
26 Associated Documents
Remedy Instructions and TSB – FRONT AIR BAG SENSOR LH NX200t
RCRIT-18V085-2906.pdf 380.816KB
Loading...
Reload document 
Open in new tab
Remedy Instructions and TSB – FRONT AIRBAG SENSOR LH NX300h
RCRIT-18V085-3189.pdf 432.788KB
Loading...
Remedy Instructions and TSB – FRONT AIRBAG SENSOR RH NX200t
RCRIT-18V085-9612.pdf 467.023KB
Loading...
Remedy Instructions and TSB – FRONT DOOR AIR BAG SENSOR LH & RH NX300h/NX200t
RCRIT-18V085-1480.pdf 748.026KB
Loading...
Remedy Instructions and TSB – TECHNICAL INSTRUCTIONS FOR SAFETY RECALL J0F – AIR BAG SENSOR REPLACEMENT CERTAIN 2016 MY PRIUS
RCRIT-18V085-0302.pdf 1571.144KB
Loading...
Remedy Instructions and TSB – QUARTER PANEL AIRBAG SENSOR LH & RH NX300h/NX200t
RCRIT-18V085-0813.pdf 951.719KB
Loading...
Manufacturer Notices(to Dealers,etc)- March 29, 2018 – Safety Recall J0F – Remedy Notice – Certain 2016 Model Year Prius Airbag Sensor
RCMN-18V085-2257.pdf 924.763KB
Loading...
Manufacturer Notices(to Dealers,etc)- March 29, 2018 – Subject: Safety Recall JLA (Interim J2A) – Phase 1 Remedy Notice – Certain 2015 – 2016 Model Year NX Vehicles and Certain 2016 Model Year RX Vehicles – Airbag Sensor
RCMN-18V085-5806.pdf 1791.182KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-18V085-9626.pdf 54.986KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-18V085-4249.pdf 58.097KB
Loading...
Remedy Instructions and TSB – FRONT AIRBAG SENSOR RH NX300h
RCRIT-18V085-1958.pdf 329.218KB
Loading...
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-18V085-0848.pdf 53.765KB
Loading...
Remedy Instructions and TSB – TECHNICAL INSTRUCTIONS FOR SAFETY RECALL JLA – AIR BAG SENSOR REPLACMENT CERTAIN 2015-2016 LEXUS NX300h/NX200t
RCRIT-18V085-0961.pdf 1131.987KB
Loading...
Recall 573 Report
RCLRPT-18V085-8024.pdf 217.607KB
Loading...
Recall Acknowledgement
RCAK-18V085-5130.pdf 245.742KB
Loading...
Manufacturer Notices(to Dealers,etc)- Safety Recall J0F (J1F) – Interim Notice – Certain 2016 Model Year Prius Airbag Sensor
RCMN-18V085-4439.pdf 207.973KB
Loading...
Manufacturer Notices(to Dealers,etc)- Lexus – Safety Recall JLA (J2A) – Interim Notice – Certain 2015 – 2016 Model Year NX Vehicles and Certain 2016 Model Year RX Vehicles Airbag Sensor
RCMN-18V085-2521.pdf 642.173KB
Loading...
Miscellaneous Document – January 31, 2018 – DEFECT INFORMATION REPORT
RMISC-18V085-7793.pdf 39.768KB
Loading...
ISSUED Owner Notification Letter(Part 577)- Lexus – JLA – Corrected Letter
RCONL-18V085-6413.pdf 64.665KB
Loading...
ISSUED Owner Notification Letter(Part 577)- Lexus – 2016 Model Year RX Vehicles
RCONL-18V085-3386.pdf 55.089KB
Loading...
Manufacturer Notices(to Dealers,etc)- Lexus – May 3, 2018 – The RX op codes “Flat Rate Time (hours/vehicle)” in the “Warranty Reimbursement Procedure” section have been updated with an additional 0.2 hours.
RCMN-18V085-0762.pdf 1214.588KB
Loading...
Recall Quarterly Report – Report #2, 2018-2
RCLQRT-18V085-4599.PDF 214.641KB
Loading...
Recall Quarterly Report #3, 2018-3
RCLQRT-18V085-9967.PDF 211.356KB
Loading...
Manufacturer Notices(to Dealers,etc)- April 26, 2018 – Information on Phase 2 RX vehicles remedy updated.
RCMN-18V085-9674.pdf 1216.28KB
Loading...
Recall Quarterly Report #1, 2018-1
RCLQRT-18V085-0717.PDF 214.529KB
Loading...
Recall Quarterly Report #4, 2018-4
RCLQRT-18V085-1058.PDF 211.469KB
Loading...
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V085&docType=RCL
- 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 👍[New & Outstanding X431 PRO5 Scanner] LAUNCH X431 PRO5 scan tool, upgrade of LAUNCH X431 PRO3 & X431 V+ PRO, configures a SmartBox 3.0 VCI (J2534/DoIP/CAN FD compliant) that performs online programming for BMW & Benz models as OEM level. More powerful features: Online Coding for Porsche/Audi, Heavy-duty Truck Diagnostics, VAG Guided Functions, 50+ Services, etc., bring ease & efficiency. Powerful software even covers online diagnostics for FCA cars & newer model data.
- [J2534 Programming with Smartbox3.0] If you’re seeking all-in-one solutions for car ECU tuning needs, LAUNCH X431 PRO5 programming tool is ready to work for you. Support online programming for BMW&Benz and hold exclusive programming backup/restoration. Come with a Smartbox 3.0 device of J2534 standard and pair with a PC to download OEM software to upgrade the ECU software, which maximizes the vehicle performance and minimizes diagnostic problems.
- [ECU Coding Customizes All You Want] With top of the tech instruction and vehicle data, LAUNCH X431 PRO5 diagnostic scanner performs well in ECU Coding and makes everything easier 1) recode adaptive data after ECU replacement 2) personalization/retrofit to improve car comfort: deactivate auto start-stop or change interior lights 3) coding data backup/reserve 4) online coding for BMW/Benz/Porsche/VW/Skoda/Seat 5) online matching/calibration for VW/for Audi, etc.
- [Huge Vehicle Software Database] LAUNCH scanner PRO5 can be nominated as a powerful troubleshooter for 99% of post 1996-automobiles. Provide abundant exclusive functions for effortless diagnostics: Benz/BMW Data Backup/Restoration; Benz/BMW Manual Mode Programming; Benz SCN Coding/Variant Coding; BMW Coding (with newer data to 2022.03); AutoAuth for FCA SGW(2018 later); Various Online Coding Data for VW/for Audi, etc. 2-Year free updating will keep renewing the data for more vehicles.
- [AutoAuth Access & 50+ Services] Partnered AutoAuth FCA US, LAUNCH scanner can directly login to the AutoAuth account and secure check (reading DTC, active test, reset functions, etc.) for FCA vehicles. 50+ services that are needed for repair shops have been packed in X431 PRO5 auto scanner, such as Hot functions (Oil Reset, EPB Reset, SAS Reset, ABS Bleeding, etc.) and Comprehensive functions (High Voltage Battery Diagnostics, Transport Mode),
- 🔥【2024 NEW RELEASE XTOOL DIAGNOSTIC TOOL】XTOOL InPlus IP616 OBD2 scanner diagnostic scan tool has packed ✅Lifetime Free Updates, ✅Android 10✅31 Services✅Up To 8 Live Data Graphing✅All Systems Diagnosis✅Key Programming✅CAN FD ✅Reflash Hidden Functions✅Export Data to CSV ✅Data View, etc, into this portable 7-Inch tablet, which makes it a great choice for DIYers, Car Owners, Retired Mechanics who need a portable add-on scan tool. 🚩Getting responsive answers via 📧 xtoolstore @ outl ook . c om📧
- 🔥【31 SERVICES】IP616 car diagnostic scanner covers 31 popular special functions of car service tools in the market, such as ABS Bleed, Oil Reset, DPF, EPB, BMS Reset, HV Battery, Power Balance, SAS, A/C Relearn, VGT Relearn Injector Coding, TPMS Reset, Throttle, Headlight, Crankshaft sensor Relearn, Suspension, Transmission Match, Tire Upgrade, etc 🚩Functions vary across vehicles. Come to us with VIN and functions to check the compatibility via QA or 📧 xtoolstore @ outl ook .c om📧.
- 🔥【ECU CONFIGURATION &KEY PROGRAMMING】XTOOL IP616 capable of both of these functions typically cost more than $600. Get the most out of your car today! Unlock hidden features and customize your car with ECU Configuration function. Say goodbye to annoying functions like daytime running lights and seat belt chimes. And that's not all; with key programming functions, like adding new keys and remote learning,etc. But remember, compatibility is key, so check your vehicle's VIN # before purchasing.
- 🔥【ALL SYSTEMS DIAGNOSIS & UP TO 8 LIVE DATA GRAPHING】InPlus IP616 car scanner tool can perform complete system diagnoses to read / clear trouble codes, view / graph live data PIDs like oil temperature, transmission fluid temperature, coolant temperature, engine speed, etc, retrieve freeze frame and read ECU Information. Graph up to 8 live data PIDs into one chart or display up to 8 individual graphs on one screen🚩NO Active tests and and Live data streams on each vehicles might be different.
- 🔥【CAN FD & 10,000+ VEHICLES COVERAGE & MULTILINGUAL】IP616 OBD2 scanner works on more than 10,000 vehicles globally, including brands of America, Europe, Asia, Australia, China and the coverage will grow continuously with frequent updates. IP616 also supports CAN FD protocol(for GM 2020+ MY), no need for adapters. Besides, IP616 is equipped with 14 languages, no worry about the language barrier.
- 【Wifi Upgrade】For a better experience, our system software will be updated frequently. It's recommended to update to the latest version when you receive the product.
- 【OE-LEVEL All System Diagnostic, Offline Scanning Supported】VO6 scan tool has the ability to access, diagnose, read/clear codes, text/graph live data for ENTIRE car systems including Body, Chassis, Powertrain, Fuel system, Light system, Engine, Transmission, ABS, SRS, TPMS, SAS, etc, quickly find car problems, turn off warning light(MIL). Offline diagnosis is supported even though there's no WiFi. Greatly helps car owners to maintain their vehicles in good condition.
- 【28+ Maintenance Functions】VO6 obd2 scanner provides 28 reset services for maintaining your cars efficiently, including Oil, EPB, TPMS, SAS Calibration, Injector Coding, ABS Bleeding, Battery Registration, Throttle Body Relearn, Headlight, Gear Learn, Gearbox, Suspension, IMMO Anti-theft Matching, Sunroof Initialization, Transport Mode, etc.
- 【Worldwide Compatibility & WiFi Free Update】VO6 scan tool can automatically identify vehicle information with auto VIN and starts auto-diagnose process, and it works on most OBDII-compliant vehicles worldwide in US, Europe, Asia, Africa, Australia for 12V cars, SUV, light truck, hybrids, and even roadster, automatically generate diagnostic report for further analysis. More importantly, bug fixes, newly added functionality, and new car model will continue to be updated for lifetime free.
- ⚠️We suggest that do not erase the codes before repairs or services have been performed. Codes will display again if the fault causing the code is not addressed. If you have any issues, welcome to email us at service@mucarco.com.
- Featured with a brand-new upgrade system, X-431 PRO5 is newly designed for All Makes, All Models, and Full system diagnosis and assists the technician to make the vehicle diagnosis and repair easier at all skill levels.
- [J2534 ECU Reprogramming Tool, No IP Limitation]: LAUNCH X431 PRO5 scan tool Upgrade all functions of X431 V+, PROS V1.0, PAD3. With the SmartBox3.0 can download the OEM software from the manufacturer’s server for free.
- [3 IN-1 FREE J2534 ECU Programming Device: LAUNCH X431 PRO5 support all new J2534/DOIP/CANFD protocols to access data and OE programming downloads for most Car; Support DC9-36V for HD Vehicle ( No NEED buy HD Module, SAVING $900+.)
- [ One-stop Intelligent Tools]: Workshop level scan tool X431 PRO5 with the repair fix solutions database, Code Assist, Repair Tips,Component Measurement, TSB, Relevant Cases,DTC Analysis to simplify complex diagnostic and achieve the trouble-free repair.
- [50+ Reset, Continuously Updated Reset Functions]: 50 resets reaching into the smallest parts to root out the problems. Extra 300+ repair functions ( in-vehicle catalog) for specific models extend the capability to regeneration, initiation, matching, etc.
- Full OBD2 Capabilities: This tool supports all 10 OBD Modes, giving you comprehensive diagnostic features for a thorough vehicle check-up. From read faults to freeze frame data, it provides everything you need for DIY repairs and maintenance. With Bluetooth connectivity, quick pairing technology, and low energy consumption, it offers wireless diagnostics that are both precise and accurate.
- Make Car Repairs Easy: Use your phone as an OBD2 scanner to identify issues with your vehicle. This car diagnostic tool is all about simplifying car repairs, offering solutions right at your fingertips. With it, you can quickly understand car problems, get repair recommendations.
- Professional Diagnostics in your pocket: Unlock professional-grade diagnostics with our car code reader in the comfort of your home. Our enhanced vehicle diagnostics tool lets you read and clear engine codes, ABS (Anti-lock Braking System) warnings, SRS (Supplemental Restraint System) alerts, and TPMS (Tire Pressure Monitoring System) signals. All results are stored as Diagnostics Reports and accessible anywhere & anytime.
- Easy-to-Use & FREE App: Our user-friendly interface is available on both iOS and Android, designed to make vehicle diagnostics straightforward.
- All the OBD2 Functions You need: Clear trouble codes, view live data streams, and monitor your vehicle's health with ease. The app also provides access to OEM DTC (Diagnostic Trouble Codes), VIN (Vehicle Identification Number), and ECU (Engine Control Unit) information, making diagnostics accessible to anyone. The app is completely free, one purchase gets you everything you need with no in-app fees or add-ons,
- ✅【2022 Update Obd2 Scanner Diagnostic Tool】ANCEL V6 Plus+ OBD2 Scanner Diagnostic Tool is an improved version of V6 Pro, upgraded from wired to wireless Bluetooth connection, while adding 10 advanced functions. V6 Plus+ supports bidirectional control, active testing, OE-level full diagnosis, 25 services, key programmer, auto VIN& Scan, and free updates 2 years.
- ✅【 25+ Special Service Hot Functions】ANCEL V6 Plus+ obd2 scanner diagnostic tool covers almost all commonly used services include Bidirectional Control, Active Test, key programmer, Oil Reset, ABS Brake Bleeding, EPB Service, SAS, DPF, BMS Reset, Throttle Reset, Injector Coding, Headlight, Transmission, A/F Settings, GEAR, NOX Set, PUMP, Seat Set, Stop/Start Reset, Tire Set, UREA Set,Sunroof, etc. 📣More new features will get after the update. ANCEL V6 Plus+ obd2 scanner diagnostic tool is to spend your less time and money to solve more problems.
- ✅【Car Key Programmer Tool】ANCEL V6 Plus+ is not only a car diagnostic tool, it is also a Car Key Programmer Tool, If your car key is lost or the key fob is broken, getting a replacement can be a hassle and cost you much money. ANCEL V6 Plus+ Bluetooth key fob programming tool allows you to Add a key/ new key programming, All keys replaced, Read keys from IMMO memory, Key cloning, etc., ❗Only some specific vhicles available now, pls confirm before purchase.
- ✅【Bi-Directional Control / Active Test】V6 Plus+ professional bi-directional scan tool can send commands and receive information to and from a vehicle’s onboard computer. Those commands will make the module perform specific tests and functions. Such as Window/Mirror/Door Lock Test, Fuel Pumps test, EGR test, Modulate the throttle and more. It is preferred by many car repair shop owners and professional mechanics, advanced DIYers to make it even easier to correctly repair vehicles.
- ✅【OE-Level Full System Diagnostics for Over 120+ Car Makers】ANCEL V6 Plus+ OBD2 Scanner works with 120+ car manufacturers and It works on 99% cars models made in 1996-2022, Let you more comprehensive and professional to diagnose ABS, SRS, Engine, Transmission, TPMS, Brake System, Suspension System, BODY and much more Possible cause of failure, And allows you can to quickly and accurately read and clear fault codes. if you meet any questions Give us your car’s VIN data and consult us anytime pls.
- CEL Doctor: The ANCEL AD310 is one of the best-selling OBD II scanners on the market and is recommended by Scotty Kilmer, a YouTuber and auto mechanic. It can easily determine the cause of the check engine light coming on, quickly read and clear diagnostic trouble codes, read live data & hard memory data, view freeze frame, I/M monitor readiness and collect vehicle information. Instead of taking car to mechanic shop, you can use it to check the trouble code and show code definition by yourself.
- Sturdy and Compact: Equipped with a 2.5 foot cable made of very thick, flexible insulation. It is important to have a sturdy scanner as it can easily fall to the ground when working in a car. The AD310 OBD2 scanner is a well-constructed device with a sleek design. It weighs 12 ounces and measures 8.9 x 6.9 x 1.4 inches. Thanks to its compact design and light weight, transporting the device is not a problem. The buttons are clearly labelled and the screen is large and displays results clearly.
- Accurate Fast and Easy to Use: The AD310 scanner can help you or your mechanic understand if your car is in good condition, provides exceptionally accurate and fast results, reads and clears engine trouble codes in seconds. If you want to find out the cause of the check engine light, this device will let you know immediately and fix the problem right away without any car knowledge. No need for batteries or a charger, get power directly from the OBDII Data Link Connector in your vehicle.
- OBDII Protocols and Car Compatibility: Many cheap scan tools do not really support all OBD2 protocols. This is not the case with the AD310 scanner as it can support all OBDII protocols such as KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. This device also has extensive vehicle compatibility with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs, as well as newer OBD2 and CAN vehicles both domestic and foreign. Check compatibility with your vehicle model before purchasing.
- Home Necessity and Worthy to Own: This is an excellent code reader to travel or home with as it weighs less and it is compact in design. You can easily slide it in your backpack as you head to the garage, or put it on the dashboard, this will be a great fit for you. The AD310 is not only portable, but also accurate and fast in performance. Moreover, it covers various car brands and is suitable for people who just need a code reader to check their car.
- [Effortless Vehicle Health Management] - Master your vehicle’s diagnostics with the blcktec 440 obd2 scanner, the ultimate tool in car maintenance. This car check engine code reader not only simplifies the process of reading and clearing trouble codes but also enhances your diagnostic capabilities by providing comprehensive emissions readiness and system resets. It’s the go-to device for turning off CEL efficiently.
- [Precision Monitoring & Analysis] - Elevate your diagnostic experience with our OBD2 scanner’s live data graphing feature. Perfect for in-depth monitoring of your vehicle's real-time performance, this tool ensures you receive accurate error code interpretations for a broad range of vehicles including cars, SUVs, light trucks, and 12V diesels equipped with OBD2. A must-have for optimal vehicle performance assessment.
- [Expert-Recommended Tool] - Embrace the 440, a scanner for car diagnostics endorsed by leading mechanics for its superior capabilities. With its patented design, vibrant 2.8" color screen, and printer compatibility for easy report sharing, this scanner is a staple in professional DIY toolkits. It includes free lifetime updates and expert support, ensuring it’s a valued part of your diagnostic equipment.
- [Streamlined Smog Preparation] - Get smog test ready with the blcktech 440 code reader for cars and trucks. Designed for efficiency, its user-friendly I/M readiness hotkeys paired with clear, color-coded LEDs provide instant readiness status, making it an indispensable tool for emissions testing. Ideal for both novices and professionals, it simplifies compliance and enhances diagnostic workflows.
- [Plug-and-Play Convenience] - Ready to use right out of the box, the BLCKTEC OBD scanner powers up directly from your vehicle’s 16-pin DLC—no batteries needed. An essential tool for every toolbox, this scanner for car maintenance is ideal for both home mechanics and automotive DIYers, offering reliable diagnostics without the hassle.
- 【Wifi Upgrade】- After you receive our products, for better product experience as well as car diagnositic, please connect to wifi/phone hotspot and accept or take the initiative to update APP operating system and car brand diagnostic software.
- 【Professional 6 System Diagnosis】- This OBD2 scanner has the most commonly system: ABS, SRS, Transmission, Engine, BCM and TPMS, which offers solution to pinpoint troubles of your cars.
- 【7 Most Useful Reset Services】- The car scanner can provides 7 hot maintenance reset: Oil EPB SAS ETS TPMS ABS DF. These powerful reset functions will make your car safer and more reliable.
- 【5" Large HD Touchscreen】- This car diagnostic scanner is equipped with a 5" color HD touchscreen: Compared with other screens, the displayed data and charts will be clearer.
- 【4 in 1 Live Data Display】- The car scanner tool shows live data of each control module by text or graphs, up to 4 parameters can be displayed at the same time. Test reports are easy to share and print.
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.