“This site contains affiliate links for which OEMDTC may be compensated” |
TECHNICAL INSTRUCTIONS
FOR
SAFETY (NONCOMPLIANCE) RECALL 24TA01
UPDATE PARKING ASSIST ECU
CERTAIN 2023 MIRAI VEHICLES
The repair quality of covered vehicles is extremely important to Toyota. All dealership technicians performing this repair are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this repair are required to have completed the following course:
- TIC206A
Always check which technicians can perform the repair by logging on to https://www.uotdealerreports.com. It is the dealership’s responsibility to select technicians who have completed the above course to perform this repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to always perform this repair.
24TA01 – PVM System May Not Display Required Images – 2023 Toyota Mirai
24TA01 – PVM System May Not Display Required Images – 2023 Toyota Mirai
Remedy Instructions and TSB
RCRIT-24V124-2634.pdf 610.333KB
Latest Recalls Documents
For the Latest and Most recent Recall Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V124&docType=RCL
Reprogramming
Approved J2534 Devices only provide reprogramming capabilities and do not support diagnostic scantool functions. For full diagnostic capabilities, please consider TIS Techstream or Techstream Lite
Toyota, Scion, and Lexus ECMs can be reprogrammed with the TIS Techstream, Techstream Lite, Diagnostic Tester, or can also be reprogrammed using a Toyota validated J2534 interface. Vehicle recalibration requires the use of the following:
- TIS Professional Level Subscription
- Toyota Calibration Update Wizard software (installed along with Techstream Software)
- Personal Computer running Microsoft Windows XP/2000 or later operating system
Toyota strongly recommends USING ONLY VALIDATED INTERFACE DEVICES that appear on this list.
Toyota works closely with J2534 interface manufacturers to ensure that their hardware works safely and efficiently with our products. Every device listed on this page has been thoroughly tested and validated on Toyota, Scion, and Lexus vehicles.
It is important to understand that only the specific devices, firmware, DLLs and APIs listed here have been tested by Toyota. We do not recommend use of any other J2534 device, firmware, DLL or API that is not listed here. Changes to J2534 hardware/software is outside of Toyota's control; in some cases, changes made to device hardware/software can negatively impact reprogramming performance. Toyota makes every effort to continue to work with J2534 interface manufacturers to ensure continued product compatibility as our respective products evolve.
J2534 Approved Device Application Chart
Device Name |
Supplier | Version | CUW Version |
Supported OS | ||
---|---|---|---|---|---|---|
Firmware* | DLL* | API* | ||||
Flasher LT-Import | Bosch Diagnostics | 01.02.07 | 01.02.07 | 04.04 | 8.8 | B, C, D, E |
Flasher PRO | Bosch Diagnostics | 01.09.18 | 01.09.18 | 04.04 | 8.8 | B, C, D, E |
Mastertech VCI | Bosch Diagnostics | 13.0.75.27 | 2.0.75.27 | 04.04 | Testing in Progress | B, C, D, E |
Dearborn Group | 1.112 | 2.05.22 | 04.04 | 8.10 | C, D | |
|
Drew Technologies | 01.09.18 | 01.09.18 | 04.04 | 8.8 | B, C, D, E |
Mongoose MFC | Drew Technologies | 01.02.07 | 01.02.07 | 04.04 | 8.8 | B, C, D, E |
Drew Technologies | 1.1.12.0 | 1.1.12.0 | 04.04 | 8.16 | A, B, C, D | |
Pass Thru Pro II | Snap-On | 01.09.18 | 01.09.18 | 04.04 | 8.8 | B, C, D, E |
*Original validated firmware/DLL versions may be superceded by the device manufacturer. Contact the device manufacturer if you are unable to find the versions listed above.
Supported Operating Systems
A | Windows 8 (32-bit; 64-bit) |
B | Windows 7 (32-bit; 64-bit) |
C | Windows VISTA Home Basic, Home Premium, Business, Ultimate |
D | Windows XP Pro SP1 or later |
E | Windows 2000 SP2 or later |
For more information about the J2534 devices listed above, click on the vendor names. To report compatibility problems with listed hardware/software, please contact the device manufacturer.
Obtaining Calibration Files
The Flash Reprogramming Calibration CD is no longer available.
ECU Calibrations are now available for download directly from TIS. A valid TIS Professional Level subscription is required to access Calibration files. These files are compatible with the above mentioned scantools and J2534 interfaces. The Calibration page, located on the Diagnostics tab in the TIS site, contains all the most current vehicle calibration files, applicable Service Bulletins, and instructions for use. Select the following link for step by step instructions to access this page.
Note: Calibration Update Software is now included in the Techstream Software Installer. A valid TIS Professional Level subscription is required to download and install Techstream Software.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, & VW/Audi.
- Supports Current & Earlier Vehicles: Enables diagnostics, programming and other “dealer” functions through OEM applications
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
- CUSTOM-DESIGNED FOR USE WITH FORSCAN and recommended by the FORScan Team
- DEALERSHIP-LEVEL DIAGNOSTICS: OBDLink EX supports all Ford protocols, modules, and advanced features of FORScan
- ELECTRONIC SWITCH allows FORScan to access all CAN buses simultaneously and enables advanced functions not possible with “toggle switch” adapters
- MAXIMUM THROUGHPUT -- up to 20 times faster than “toggle switch” adapters
- ROCK-SOLID CONNECTION avoids data corruption and dropped packets
- 🚗[Technical assistance] If you have any installation problems, download the installation manual. Or please contact us at any time. We can provide technical support and help you install software online
- 🚗[Vehicle Coverage] Installation Tips: Please turn off anti-virus software before install. VXDIAG VCX NANO fully compatible with SAE-J2534-1 & SAE-J2534-2. All current and most legacy vehicle protocols: CAN, UART, KW2000, Class2, GM LAN, etc.
- 🚗[Functional] ●USB vehicle-to-PC connectivity●Supports Windows,XP●Supports Windows 7● CE and FCC compliance for hardware●Firmware Updatable. 【SPS】Service Programming System: ◎Passthrough programming on GM past model and Global A vehicles◎Increase reprogramming speed 20-70% and get ready to service new models.
- 🚗[GDS] Global Diagnostic System: ◎New Diagnostic Application Software required for all GM Global Architecture (Global A) Vehicles. ◎GDS & GDS2 is software which runs on a specific PC. Updates received via TIS2Web.
- 🚗[Efficient&Convenience] Quick access to vehicle data for maintenance or management reports.Quickly attaches to vehicle's diagnostic connector. Mixed fleet capabilities with broad protocol support.May be used with desktop PC or laptop. make sure your computer at least 4GB.Tech2win software only installed on 7 32bit computer and on physical system.Please download the latest vxmanager from vxdiag official website.
- 【ALL-IN-1 REPROGRAMMING TOOL】With its exceptional compatibility, TOPDON RLink Lite J2534 pass-thru programmer and enhanced VCI seamlessly conducts original equipment-level diagnostics, programming, and coding jobs, achieving OE-level diagnostics across various vehicle models with a single device. Note: TOPDON RLink Lite is Window-only, not compatible with Mac.
- 【J2534 REPROGRAMMING TOOL】The RLink Lite functions as a J2534 pass-thru programmer to achieve OEM programming and diagnostics. Compliant with three major automotive industry standards D-PDU/J2534/RP1210, and latest DoIP/CAN/CAN FD, the RLink Lite ensures extensive vehicle coverage and speedy diagnostics.
- 【ENHANCED VCI】The TOPDON RLink Lite operates as a versatile VCI box, enabling you to achieve advanced diagnostic, programming, and coding functionalities when paired with OE software. Moreover, TOPDON's DMS Driver Management System helps you easily master the OE software by offering drivers for various brands.***We don't provide extra OE software.
- 【FASTER & SMOOTHER】Powered by a 1.8 GHz quad-core processor, enjoy swift response and seamless operation. The RLink Lite Enhanced VCI runs on Android 11.0 for advanced features and top-notch security. With 2GB RAM and 32GB ROM, storage is ample for smooth performance and quick access to data and apps.
- 【PACKAGE+J2534 SUPPORT】The package comprises the RLink Lite main unit, a 2m OBDII diagnostic cable, a 5m Ethernet cable, a 1.5m USB 2.0 data cable, a 12V DC power adapter, and a quick start guide. Enjoy complimentary technical support from our dedicated TOPDON team for any J2534-related inquiries or concerns throughout the lifespan of your device.
Last update on 2024-07-16 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
•• PROTECTED 関係者外秘
TECHNICAL INSTRUCTIONS
FOR
SAFETY (NONCOMPLIANCE) RECALL 24TA01
UPDATE PARKING ASSIST ECU
CERTAIN 2023 MIRAI VEHICLES
The repair quality of covered vehicles is extremely important to Toyota. All dealership technicians performing this repair are required to successfully complete the most current version of the E-Learning course “Safety Recall and Service Campaign Essentials”. To ensure that all vehicles have the repair performed correctly; technicians performing this repair are required to have completed the following course:
•
TIC206A
Always check which technicians can perform the repair by logging on to https://www.uotdealerreports.com. It is the dealership’s responsibility to select technicians who have completed the above course to perform this repair. Carefully review your resources, the technician skill level, and ability before assigning technicians to this repair. It is important to consider technician days off and vacation schedules to ensure there are properly trained technicians available to always perform this repair.
1
•• PROTECTED 関係者外秘
No further action required.
I.
OPERATION FLOW CHART
The flow chart is for reference only. DO NOT use it in place of the full technical instructions. Follow ALL steps as outlined in the full technical instructions to confirm the campaign is completed correctly.
II.
IDENTIFICATION OF AFFECTED VEHICLES
1.
CHECK VEHICLE FOR CAMPAIGN ELIGIBILITY
a)
Compare the vehicles VIN to the VIN listed on the Repair Order to ensure they match.
b)
Check the TIS Vehicle Inquiry System to confirm the VIN is involved in this Campaign, and that it has not already been completed.
NOTE:
TMNA warranty will not reimburse dealers for repairs completed on vehicles that are not affected or were previously completed, even by another dealer.
III.
PREPARATION
A.
TOOLS & EQUIPMENT
•
T-SB-0107-20 Rev. 2
•
DCA-8000 Battery Diagnostic Station
•
Techstream ADVi / Techstream 2.0 / Techstream Lite
Covered
Old Calibration
Not Covered
Campaign completed.
Return the Vehicle to the customer.
Perform Health Check and Verify ECU Calibration.
Verify Vehicle Eligibility
1.
Confirm vehicle VIN matches the RO.
2.
Check for Campaign eligibility using TIS.
New Calibration
Reflash the parking assist ECU with the NEW software.
No further action required.
2
•• PROTECTED 関係者外秘
IV.
BACKGROUND
V.
SAFETY PRECAUTIONS
CRITICAL INFORMATION – READ THOROUGHLY
An ECU could be damaged if an error occurs in the communication while reprogramming the ECU. Confirm all work is performed as described in these instructions.
1.
STABILIZE THE POWER TO THE PERSONAL COMPUTER SIDE
a)
Be sure to connect the personal computer to an external AC power supply.
NOTE:
The ECU could be damaged if the battery voltage of the personal computer drops while reprogramming.
b)
Turn off the screen saver and power saving mode of the personal computer so that the power to the hard disk is kept supplied.
NOTE:
If the screen saver or power saving mode launches while reprogramming, the communication may be disconnected, resulting in the damage of the ECU.
3
•• PROTECTED 関係者外秘
c) DO NOT block the ventilation opening for the cooling fan of the
personal computer.
NOTE:
If the ventilation opening for the cooling fan is blocked with a
sheet cover or the like, the personal computer may be heated
excessively, causing the operation of the personal computer to
stop.
Due to the stop of the operation, the communication for
reprogramming signals could be stopped, resulting in the damage
of the ECU.
VI. CIRCUMFERENCE MONITORING CAMERA CONTROL MODULE SYSTEM
CALIBRATION ID VERIFICATION
1. CHECK FOR DTC’S
a) Using a GTS+, click the “Health Check” button on the Main Menu.
NOTE:
This Campaign covers only the software update to the
Circumference Monitoring Camera Control Module System, as
detailed in these instructions. It does not cover the diagnosis or
replacement of any other systems on the vehicle.
2. CHECK CURRENT CALIBRATION
a) Locate the “Update” column of the “Calibration Information” for the Circumference Monitoring Camera
Control Module system on the “Health Check Result” screen.
b) Determine the status of an available update; indicated by a YES or NO.
NOTE:
If the CIDs indicate ‘Yes’, proceed with the update procedure.
4
•• PROTECTED 関係者外秘
◄ CRITICAL MESSAGE ►
It is critical that T-SB-0107-20 Rev. 2 in addition to the Technical Instructions for this Recall [or LSC/CSC] are followed. This TSB outlines all steps necessary to prevent reprogramming failure. Toyota will not provide reimbursement coverage for reprogramming failures if this TSB is not followed. If you have a reprogramming failure that requires PARKING ASSIST ECU replacement and the Technical Instructions and TSB were followed correctly, please create a case with the Technical Assistance Hotline documenting all information related to the failure. If sufficient reporting is received related to re-flash failure, there will be consideration for reimbursement.
VII.
VEHICLE PREPERATION
1.
VEHICLE PREPERATION
a)
Confirm the following conditions:
•
Vehicle in the IG position (READY OFF).
•
Transaxle in Park.
•
Parking brake engaged.
•
Turn off all electrical accessories (i.e. climate control, audio system, etc.)
•
Headlight switch in the DRL OFF position. (w/ DRL OFF position)
•
Windshield wiper switch in the OFF position.
b)
When the vehicle has no “OFF position” in the light control switch:
•
Turn the IG ON.
•
Set the light control switch to the AUTO position and make sure that the exterior lights are turned on.
•
Light up the automatic light control sensor with work light to keep the exterior lights turned off.
2.
CONNECT THE 12V BATTERY TO A POWER SUPPLY
a)
Connect the DCA-8000 or other type of a power supply (not a battery charger) to the 12V battery.
b)
Tap the Reflash icon from the Main Menu screen of the DCA-8000.
A power supply MUST be used during reprogramming. ECU damage will occur if the battery voltage is not properly maintained during this re-flash procedure.
NOTE:
A power supply must be connected directly to the 12V battery terminals and NOT the remote jump posts under the hood (if equipped).
3.
VERIFY GTS+ SETUP
a)
Verify that the GTS+ meets the following conditions:
•
The latest version of software is loaded.
•
The GTS+ battery is fully charged. If not, connect the GTS+ to a 120V source.
•
The DLC III cable is in good condition.
Is there an update available for the Circumference Monitoring Camera Control Module System?
Campaign complete. Return the vehicle to the customer.
Proceed to section VII. Vehicle preparation on page 4.
Yes
No
5
•• PROTECTED 関係者外秘
The GTS+’s battery voltage must also be maintained during the re-flash procedure. If necessary, plug the GTS+ into a 120V outlet during this procedure.
NOTE:
If the GTS+ communication with the vehicle fails during the re-flash procedure, the parking assist ECU will be damaged.
VIII.
UPDATE CALIBRATION
1.
CONFIRM THE CALIBRATION ID
a)
Confirm the current calibration ID in the Circumference Monitoring Camera Control Module System.
The calibration IDs to re-flash in this campaign are as shown in the table below.
NOTE: The Parking Assist ECU calibration IDs are found in GTS+ under the following system: Circumference monitoring camera control module system
Parking Assist ECU Calibrations
CIRCUMFERENCE MONITORING CAMERA CONTROL MODULE SYSTEM
Model
Current Calibration ID
New Calibration ID
MIRAI
8679F6207001
8679F6207021
8679F6212011
8679F6207001
8679F6207021
8679F6212111
NOTE:
If the Circumference monitoring camera control module system has the New CIDs, no update is necessary.
2.
REFLASH THE CIRCUMFERENCE MONITORING CAMERA CONTROL MODULE SYSTEM
a)
Click “Yes” on the “Health Check Results” screen or follow the links on the table above the begin the reflash process.
NOTE:
Reflash failure should be extremely rare and can be avoided by following all instructions and reprogramming best practices.
6
•• PROTECTED 関係者外秘
After “Flash Calibration Update Successful”
is displayed on the GTS+ screen, turn the IG
off and keep with IG OFF for 5 minutes.
IX. COMPLETE REPAIR
1. DISCONNECT THE DCA-8000
2. PERFORM VERIFICATION HEALTH CHECK
a) Using a GTS+, click the “Health Check” button on the Main
Menu.
b) Clear DTC’s that may have set during the re-flash procedure.
c) Re-run the Health Check to confirm that no DTC’s reappear.
THIS VERIFICATION HEALTH CHECK IS
NECESSARY to update the results and CIDs
to the National database.
3. CONFIRM CID UPDATE
a) On the Stored Data tab, confirm the following for the Circumference Monitoring Camera Control Module
System:
• The Calibration number has the “New CID” number.
• The Update column says “No”.
Confirm the CIDs has been updated successfully to the NEW CIDs by someone other than the
individual who performed the repair. Refer to page 5.
7
•• PROTECTED 関係者外秘
4.
PRINT CUSTORMER HEALTH CHECK REPORT
a)
From the Stored Data tab, select the Customer Health Check Report button (TIS will launch when button is pressed).
b)
Log in to TIS.
c)
Input Vehicle Mileage and Repair Order number.
d)
Check the “Performed” campaign button for the applicable campaigns.
e)
Select the Report button.
f)
Confirm Customer Health Check Report information is correct.
g)
Print Customer Health Check Report from TIS.
h)
Sign and provide to the customer.
◄ VERIFY REPAIR QUALITY ►
–
Confirm the reflash completes successfully.
–
Confirm there are no DTCs after the Calibration update.
–
If you have any questions regarding this update, please contact your area representative.
8
•• PROTECTED 関係者外秘
X.
APPENDIX
A.
CAMPAIGN DESIGNATION DECODER
Examples:
20TA01 = Launched in 2020, Toyota, Safety Recall Remedy Phase, 1st Safety Recall Launched in 2020
21TC02 = Launched in 2021, Special Service Campaign, 2nd Special Service Campaign Launched in 2021
22TE05 = Launched in 2022, Customer Support Program, 5th Customer Support Program Launched in 2022
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END